Problem with iriver E10

kindly reload new firmware from the company site.

goto.www.iriver.usa.com.ask your model e10.update file.

Hi there,
Based on iRiver E10 User's Guide, you can use iRiver Plus Software to transfer music and picture files to E10.
If you dont have the software iRiver Plus, you can download and get the installation guide here:

iRiver Plus 3 (62.2 MB)

(see this guide below for how to Sync)


goodluck :)

you could try and use a different computer. Maybe at a friends house or at a libary.

:)

READ ALL FIRST

1.Download and install iriverter (http://iriverter.sourceforge.net).
2.Open the Profiles folder (C:\Program Files\iriverter\profiles).
3.Make a COPY of the u10.profile file, and name it e10.profile.
4.Open the newly created e10.profile within I USED NOTEPAD.
5.Change the device from “u10′ to “e10′.
7.Save the file, and close it.
6.Change the dimensions from “320×240′ to “128×128′.
8.Launch iriverter, and select the E10 under Options > Device > iriver.
9.Click the Single Video button.
10.Specify the video file to be converted for the input field, and specify the output file where you want to save it.
( thanks Boi )

Or just paste this into the profile (is quicker)

brand=iriver
device=iriver / e10
maxVideoBitrate=384
maxAudioBitrate=128
dimensions=128x128
maxFrameRate=15
wrapperFormat=avi
audioFormat=mp3


Cheers..
twenty


Have a nice day.

P.S my e10 screen is permenently black and waiting for a soluition other than forking out $100AU to fix it. So grabbed an x20

Looks lo\ike the OS crashed in the player. It is probably asking for a restore procedure. It is located on the CD or in the setup program that came wiht the Iriver.

Yeh that happened to my E10. Just go to your nearest Iriver store (you can find store locations on the iriver site) and tell them your problem. They should send it to Melbourne to get fixed. I got mine back a few weeks ago and its fine!

It may not work, but.
Find the reset hole in the side of the E10 and perform a reset (you shove the end of a paper clip in the hole)
I have fixed my wife's and my daughter's by this method a couple of times!

You need to upgrade the firmware by using iriver plus 3 in the 'tools' section it should have upgrade firmware.

Hi There,

There are 2 conditions related to the e10 Emergency USB message.

1. If your PC does NOT recognise the iriver as a USB device/drive, there is an issue with the Hard Drive.
2. If your PC DOES recognise the iriver as a USB device/drive and can read the files, there is an issue with the Circuitry in your e10.

In either case, your iriver needs to be returned to the manufacturer. If in warranty you can get this repaired at no cost (of course).