I have a whirlpool duet model wfw70hebw. The washer stopped and I can't unlock the door. Have error code E1 F9

What are you working on? Please be as specific as possible with a manufacturer & model number if possible, we can much better assist you once we know exactly what you're having a problem with! Thanks, let us know!

How To Fix Maytag Washer Error Code F9 E1 ...

www.appliancerepairlesson.com/2013/.../maytag-washer-error-code-f9-e...

Dec 10, 2013 - The error code F9 E1 will be displayed on most newer Maytag washers and ..... My whirlpool duet wfw94heaw0 gives the error code F09 E01.

KitchenAid f09 error code Dishwashers Questions ... - Fixya

Whirlpool Duet Front-Load Washer (WFW70HEBW) - YouTube

? 2:09
www.youtube.com/watch?v=bO80EPGg79A
Sep 19, 2013 - Uploaded by hh gregg Whirlpool® Duet® 4.1 cu. ft. Front Load Washer with the Cold Wash cycle: ..

look in the book it came with

F06 Drive motor tachometer error The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.

Potential Causes

• Check wire harness connections between the Drive Motor/Tachometer and the Motor ControlUnit (MCU), and between the MCU and the Central Control Unit (CCU)
• Check the Drive Motor
• Check the MCU
• Check the Wire Harness

Replace failed component.

Whirlpool Duet error f6 Google Search

Try cleaning the drain filter.

F29 is a door unlock error, this error occurs after the washer has made 6 attempts to unlock the door. Usually this occurs when the door lock mechanism is broken and/or the door switch/unit lock has failed. To resolve this issue you'll need to check the door switch, door lock mechanism and the wire harness between the central control unit & door switch, replace the part that has gone bad.

That's a door unlock error. The machine will display that code when after trying 6 times to unlock the door, it still won't unlock.

f22 is a door lock error try this hit cancel turn your dial to another setting, hit start and once it starts hit cancel again and it should unlock. thats what i did anyway.
If you're getting an F22 error, you will want to check anything to do with the door latch switch.