Tasmyn Wyman Posted on Jan 19, 2015

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hi Our Jura Impressa F7 keeps saying " Open switch" then " Rinsing system" continuously. Please help what do I do?? I have rinsed the system several times.

I have restarted the machine. I have tried warm water in the Water tank.I have switched it off for a day. I have tried pushing other buttons , but It will not allow me. Please help.

1 Answer

Kolbrun Gunnarsdottir

Master 1,228 Answers
Posted on Feb 02, 2015

Kolbrun Gunnarsdottir

Master

Joined: Nov 21, 2009

Answers

1228

Questions

Helped

277587

Points

3915

Good evening
I would look in the troubleshooting pages in the manual.
here you can take a look, Kolbrun
Free User Manuals and Owners Guides ManualsOnline com

Free User Manuals and Owners Guides ManualsOnline com

manualsonline.com

Manuals and free owners instruction...

3 Related Answers

Tushar

9 Answers
Posted on Oct 16, 2009

SOURCE: My Jura Impressa xs90 keeps stating fill system,

Empty the Water tank and fill it with warm water. Then keep trying for some time and the problem will get solved.

Anonymous

15935 Answers
Posted on Aug 15, 2010

SOURCE: Jura Impressa F7 rinse will not push water through the heads.

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.

Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Anonymous

2 Answers
Posted on Jan 19, 2011

SOURCE: jura impressa f7 decalcifying pressed rinse but

First you have to turn the machine off and then press and hold rinse buttom until you read empty tray and then follow the rest of the instructions. Good luck

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

have you tryed to make a drink while it says that.

Read full answer

May 03, 2016 • Capresso Jura Impressa X9 one step

0helpful

1answer

Water is dripping slowly from one spout. How do I access and remove the spout assembly on a Jura Impressa F7?

Open the whole machine and you'll find the spout. Tighten up the nut there, the washer is like a tap thats dripping

Read full answer

Dec 10, 2014 • Jura Capresso Impressa F7 Espresso Machine

0helpful

1answer

I have just purchased Jura machine and set up. I pressed rotary switch and it says on display machine filling. then it stops like its meant to and says press rotary switch. I press it and instaed of r

Hi Jon, I'm Joel, Is this machine you have for a restaurant or private use. a friend bought a machine like this at Bed Bath & Beyond and his machine had a problem with the rinsing cycle and beyond, this machine has a motherboard inside just like a computer and it should have a reset button underneath it or in the back or it's possible that the motherboard is bad. To recycle the motherboard hit the reset button and wait till the machine to finish rebooting and pull the plug and wait about 5 minutes, if this doesn't work then you need to take back to the store for a replacement or refund, If you ask me I would rather have a refund because this particular machine always goes into a malfunction mode. This is one of the newer model so unfortunately the company didn't have time to get all the kinks out. Hope this helps....Joel

Read full answer

Oct 25, 2014 • Jura Impressa J9 Automatic Coffee Center

0helpful

2answers

Jura impressa c5 leaks steam when I use the milk frother

hi this video will help you, Good Luck.
https://www.youtube.com/watch?v=KP_KvZs1wLY

Read full answer

May 02, 2014 • Jura Impressa C5 Automatic Coffee Center...

0helpful

1answer

My jura X7 system is rinsing with milk. When pressing the rinse button, the machine is drawing milk to rinse instead of water??

The milk tubes should be submersed into water with a milk cleaning agent. sounds like you've left the milk tubes drawing from the fridge with milk in it.
Bean to cup cleaning

Read full answer

Aug 15, 2013 • Jura Capresso Impressa X7 Espresso Machine

1helpful

2answers

Error message Fault 5

The message 'FAULT 5' on the Jura Impressa F7, appears when there is a problem with the heating sensor. Normally it needs service or replacement. You can try to unplug it from the power supply for an hour and then open it again. See if it works.

Read full answer

Dec 22, 2011 • Jura Capresso Impressa F7 Espresso Machine

2helpful

1answer

Jura c9 on out of box start up won't leave rinse cycle and enter heating mode. Checked rotary dial but it seems fine.

You need to be patient and keep pressing the rinse button. I took a few water tanks of rinsing before it clicked over to heating mode. The manual and DVD need to mention this!

Read full answer

May 13, 2011 • Jura Capresso Capresso IMPRESSA C9 One...

11helpful

2answers

Jura impressa f7 decalcifying pressed rinse but does not show empty button as the manual says

First you have to turn the machine off and then press and hold rinse buttom until you read empty tray and then follow the rest of the instructions. Good luck

Read full answer

Dec 31, 2010 • Jura Capresso Impressa F7 Espresso Machine

0helpful

2answers

We have a Z5 and repeatedly get the message "System Fill" even though the water tank is full. The rinse light flashes and when depressed the message changes to "System Fills" (asterisks mine to emphasize...

Run a decalcify cycle, your system sounds clogged

Read full answer

Aug 19, 2010 • Jura Capresso Impressa Z5 Espresso/Coffee...

1helpful

1answer

I keep getting open tap and when I open tap, its says close tap. I have unplugged it and it still continues the loop.

I have had this happen when trying to change filters and go through the rinse procedure. For me the problem was that the little hole on the frothing wand was plugged. Once I cleared the little chuck of dried milk everything started working again.

Read full answer

Dec 28, 2009 • Jura Capresso Impressa F7 Espresso Machine

Not finding what you are looking for?

View Most Popular

Impressa F7 Espresso Machine

Coffee Makers & Espresso Machines

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

Capresso Jura Impressa X9 one step

2,841 views

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Jura Capresso Impressa F7 Espresso Machine? Or just drag it here!

Related Topics:

Trustworthy Expert Solutions

Hi Our Jura Impressa F7 keeps saying " Open switch" then " Rinsing system" continuously. Please help what do I do?? I have rinsed the system several times.

1 Answer

Kolbrun Gunnarsdottir

3 Related Answers

Tushar

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

Water is dripping slowly from one spout. How do I access and remove the spout assembly on a Jura Impressa F7?

I have just purchased Jura machine and set up. I pressed rotary switch and it says on display machine filling. then it stops like its meant to and says press rotary switch. I press it and instaed of r

Jura impressa c5 leaks steam when I use the milk frother

My jura X7 system is rinsing with milk. When pressing the rinse button, the machine is drawing milk to rinse instead of water??

Error message Fault 5

Jura c9 on out of box start up won't leave rinse cycle and enter heating mode. Checked rotary dial but it seems fine.

Jura impressa f7 decalcifying pressed rinse but does not show empty button as the manual says

We have a Z5 and repeatedly get the message "System Fill" even though the water tank is full. The rinse light flashes and when depressed the message changes to "System Fills" (asterisks mine to emphasize...

I keep getting open tap and when I open tap, its says close tap. I have unplugged it and it still continues the loop.

Not finding what you are looking for?

Impressa F7 Espresso Machine

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

Ask a Question

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns

Sulejman Sulejmani

Grand Canyon Tech

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Hi Our Jura Impressa F7 keeps saying " Open switch" then " Rinsing system" continuously. Please help what do I do?? I have rinsed the system several times.

1 Answer

Kolbrun Gunnarsdottir

3 Related Answers

Tushar

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

Water is dripping slowly from one spout. How do I access and remove the spout assembly on a Jura Impressa F7?

I have just purchased Jura machine and set up. I pressed rotary switch and it says on display machine filling. then it stops like its meant to and says press rotary switch. I press it and instaed of r

Jura impressa c5 leaks steam when I use the milk frother

My jura X7 system is rinsing with milk. When pressing the rinse button, the machine is drawing milk to rinse instead of water??

Error message Fault 5

Jura c9 on out of box start up won't leave rinse cycle and enter heating mode. Checked rotary dial but it seems fine.

Jura impressa f7 decalcifying pressed rinse but does not show empty button as the manual says

We have a Z5 and repeatedly get the message "System Fill" even though the water tank is full. The rinse light flashes and when depressed the message changes to "System *Fills*" (asterisks mine to emphasize...

I keep getting open tap and when I open tap, its says close tap. I have unplugged it and it still continues the loop.

Not finding what you are looking for?

Impressa F7 Espresso Machine

I have a Jura impressa x9 and when I turn it on it says system is filling then it says system is rinsing. It continues to flash these 2 messages but never prompts me to make a drink.

Related Topics

Ask a Question

Popular Questions

Fill beans message keeps coming up on jura capresso impressa s9

Malfunction 8

Tray empty message

"Fill System/Press Steam"

EMPTY GROUNDS warning will not reset

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns

Sulejman Sulejmani

Grand Canyon Tech

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

We have a Z5 and repeatedly get the message "System Fill" even though the water tank is full. The rinse light flashes and when depressed the message changes to "System Fills" (asterisks mine to emphasize...