HOW DO I SOLVE ERROR CODES EDC 00637-03, FER 03279-04, RETS 04029-04, RETS 04013-10, RETS 04001-10

Question moved from Cell Phones. We don't do heavy plant and machinery

MAN Electronic Diesel Control Fault Codes

Classtrucks.com https://www.classtrucks.com > man-fault-codes > man-...
EDC stands for MAN Electronic Diesel Control fault codes. It is an ... Error sending FFR1 (FFR / EDC-CAN). FFR transmits in FFR1 incorrect values. 3808, Error ...

MAN Errors - MAN truck & bus fault codes (EDC)

MAN Errors https://www.manerrors.com Every problem on MAN vehicles is diagnosed on the instrument panel using a lamp and a code. A warning light indicates a group of errors, while a fault code ...

EDC7 MAN fault codes list PDF

jimcontent.com https://s7609befdab33e790.jimcontent.com > E...
EDC7 MAN fault codes list PDF. MAN trucks PDF manuals. 81. Pressure difference or ... Error sending CAN1 (FFR/EDC-CAN). Welcome to one of the messages, FFR2 FFR1 ...
19 pages

..

Engine oil and fluid level issues

The following link provides the brief explanation of the error codes. The EDC code reported is likely related to the common rail fuel delivery system. It will likely take specialized equipment to diagnose the problem properly only available at a service center.

Hope this helps?

http://www.techtransa.lt/MAN_klaidu_kodai.pdf

The fault cods EDC 03779,03778 have overlapping causes consist leakage of injectors,valve ,pipe but in some time malfunction in the high pressure pump , any one agree with me or there is any addition causes. some people have solve the problem with changing the fuel filter.

03779.....EDC ............ Rail pressure: Leakage in quantity compensation

03778.....EDC ...................Rail pressure: Leakage in overrun conditions

I have an answer for you.The codes are coming from a lost Tachometer memory.Yoour Edc Control Unit and teh Tachometer are not correctly aligned.You need to have th Tachometer reprogrammed.It has lost memory

1.EDC:00959-01 >seconds-Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

2. EDC:00960-01>minutes- Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

3. EDC:00961-01>hour- Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

4. EDC:00962-01>Day- Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

5. EDC:00963-01>Month- Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

6. EDC:00964-01>Year- Action-Tachometer has lost memory and is not aligning with the Edc Control unit. mixture of time and date>Tachometer to be reprogrammed.

my tga give code edc 03779-01

EDC FREQUENTY APPEARS AND ENGINE CUTS OFF

For VB

Private Sub Form_Load()
Dim sendObject As Object
Dim ret As Integer

Set sendObject = CreateObject("Winfax.SDKSend")

ret = sendObject.SetSubject("TEST!!!")
If (ret = 1) Then
MsgBox ("SetSubject Failed")
End
End If

ret = sendObject.SetKeywords("Test")
If (ret = 1) Then
MsgBox ("SetKeywords Failed")
End
End If

ret = sendObject.SetResolution(0)
If (ret = 1) Then
MsgBox ("SetResolution Failed")
End
End If

ret = sendObject.SetQuickCover(1)
If (ret = 1) Then
MsgBox ("SetQuickCover Failed")
End
End If

ret = sendObject.SetCoverText("This is a Test.")
If (ret = 1) Then
MsgBox ("SetCOverText Failed")
End
End If

ret = sendObject.SetUseCover(1)
If (ret = 1) Then
MsgBox ("SetUseCover Failed")
End
End If

ret = sendObject.ShowCallProgress(1)
If (ret = 1) Then
MsgBox ("ShowCallProgress Failed")
End
End If

ret = sendObject.SetTo("Somebody")
If (ret = 1) Then
MsgBox ("SetTo Failed")
End
End If

ret = sendObject.SetNumber("#######") 'My fax number
If (ret = 1) Then
MsgBox ("SetNumber Failed")
End
End If

ret = sendObject.SetAreaCode("###") 'My area code
If (ret = 1) Then
MsgBox ("SetAreaCode Failed")
End
End If

ret = sendObject.SetPriority(1)
If (ret = 1) Then
MsgBox ("SetPriority Failed")
End
End If

ret = sendObject.AddRecipient()
If (ret = 1) Then
MsgBox ("AddRecipient Failed")
End
End If

ret = sendObject.LeaveRunning()
If (ret = 1) Then
MsgBox ("LeaveRunning Failed")
End
End If

ret = sendObject.GetRecipientCount() 'this shows 1
MsgBox ("Recipient Count: " & ret) 'recipient

ret = sendObject.Send(1)
If (ret = 1) Then
MsgBox ("Send Failed")
End
End If

End Sub


If u like that Appreciate me by giving vote.
And try to be little specific while u ask question, that means, if u want code on any object ask for which language u r in need of?

Hello,

Here is the error information for Fault Code F7

F7 Lock motor relay watchdog circuit is active when it should be off Microprocessor checking the operation of the EDC lock, relay failed. Replace EDC.
Hope this is helpful, I will also provide you a link to to a helpful site.

http://www.applianceaid.com/fault_codes.html

version 1 of your unit F7 error code.


F7 Lock motor relay watchdog circuit is active when it should be off Microprocessor checking the operation of the EDC lock, relay failed. Replace EDC.
This does not mean that this is the problem but it is where I would start. EDC is less than a fouth the cost of the EOC.

Please take the time to rate this solution

Thanks,

clarkco