How do I get the outdoor temperature to stay on my wireless multizone digital thermometer. it disappears when teperature is too cold. what am I doing wrong?
Pushing alert changing channel selecting temp pushing alert again selecting temp and pushhing alert again. Problem is is keeps popping back to indoor temperature
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The same as when you have two radio stations on the same channel or frequency. The receiver wants so receive them both, resulting in a scrambled and useless signal in the receiver.
It won't work.
If the system can work with more than one (wireless) thermometer each will have an own channel number. and you will have to switch on the display to read one or the other.
I can understand when it is very cold outside, the voltage of the battery drops below the point is can service the transmitter (in the thermometer). But if night temperature is not below zero that can't be the cause.
Be aware, even batteries that come with a new device, can be "old". you never know what the battery had to last, before you put it in the device.
I would advice to buy a new battery for the thermometer. Look in the manual, for what the manufacturer advices. But never use manganese (Zinc-Carbon) batteries. Although the alkaline batteries perform bad in cold, it could be the best choice.
My outdoor thermometer transmitter was sending hhh instead of the current temperature. I opened it up a bit and sprayed it with compressed air (Ultra Duster or similar product) to clean the temperature sensor. It has worked fine since then.
I have a BIOS wireless indoor/outdoor thermometer. The indoor base unit doesn't display the outdoor temperature - it is blank - however the other temperatures - humidity, indoor temp, etc., are displayed, What is the problem? We have misplaced the manual so we don't know what to do.
×