Electric Dbl Wall Oven-loud popping noise at end of self clean
Bill ,i dont suspect the control unit is the problem im going back to the loud pop you heard I would say the pop you heard was one of the elemants blowing and that the reason the the breaker tripped if you say the clock,timer and light functon are ok it more so points to an elemant in most cases when an elemant blows it breaks the circuit .but the other componants also work when you reset the breaker i think in this case bill i would call a electrician it needs testing,sorry i could not help this time bill,but do not hesatate to contact me if i can help you again.adrian
I had a similar problem last night with my Kenmore 790 flat-top range. Oven was on, heard a loud pop and the main breaker tripped. When I got the power back on the electronics that control the oven (eoc) didn't come back. The burners on the range top still work, but the oven no longer does.
Everything I've read so far suggests that: 1) the most likely culprit is the EOC board and replacing should fix the problem; 2) this is a fairly common problem with ranges; and 3) my particular range was manufactured by frigidaire.
Do these sound like reasonable/accurate conclusions?
My Kenmore 790 range just had the same problem. Was using the oven, heard a loud pop, which tripped the main breaker. When I got the power back on, the electronics that control the oven were dead. The range elements still work.
From what I've gathered, the most likely culprit is the eoc (electronic oven control) module and replacement should fix the problem. Any advise/differing opinions?
Maytag electric range 8114P732-60 low element in oven will not get hot
burned out and tripped the breaker
×