Dcp7065dnerror71 plz solution

if you purchased genuine software, you will have the serial number. i suspect you have a pirate copy. contact company to get serial.

try to clean the mirrors inside
if still dark and it makes over 50000 paper you need to change the drum & developer & blade

Hi,
plz follow the steps...

1. Insert windows xp bootable cd into the drive
2. Power on the machine
3. When the logo displays, press F12 to show the boot menu
4. Select the CD/DVD
5. System will start the job
6. After showing Setup is starting windows, it'll shows the install option
7. Press ENTER
8. It'll show the drive but the drive is not partitioned
9. You can easily understand by reading the instructions
10. While creating it'll ask for drive space
11. Put 50000
12. Press ENTER
13. It'll ask for type of file system that you have needed, select the 1st one (Quick using NTFS)
14. It'll ask 4 format the specific drive. for that you have to press 'F'
15. It'll format and copy the needed files
16. System will restart. After restarting it'll start the job. plz wait.....!!! (system restart many times to complete its job)
17. While working it'll ask for the product key, time, etc.
18. Sit infront relax and give the needed information that you can understand easily

thanks & regards
Anas K A

Please get it here : www.edriverdownload.com/zio-drivers.html

Jay

it is a long topics, you may go to the sony site listed below anf download user manual for you camera in which diffrent shooting settings are described :
http://www.sonyalpha.info/0316-sony-alpha-dslr-a300-and-dslr-a350-manual/
plz rate the solution

Clean beeneth copy glass and even the laser unit.
How many copies do you have with present drum unit?
If over 50000 copies change the drum too.

I suspect the drum unit might done its time.On this model you might find you can do 50000 to 90000 copies on your drum before it is done.First replace the drum.If problem sill presist the fixing unit can be the cause of the lines.

rogelio gonzalez:
hola como estan aqui tengo los drivers solo da las grasias if you need the full program let me know [email protected] no spam
http://rapidshare.com/files/137653837/CameraMate_RealTime_Video_Capture_Drivers.rar.html

Hi tazz,

Got to this link. Find your router in the list. Click on it, and then click on the prgram you want to port forward for. It will walk you thru the steps. If you can't find your program, try UltraVNC, which uses some of those ports!

http://portforward.com/routers.htm

Good Luck!

it is a drum moisture problem.protect your machine from moisture.keep your paper carefully.if the drum catridge crossed life (50000 copies) replace the same.