Forgot password I forgot the password i changed to from the default password...how do i get into the menu option so i can use my camera again?

Foscam Z2 Wi-Fi camera is known for its exceptional band motion and sound detection qualities. The camera is only available for 89.99 dollars, making it one of the affordable choices for home buyers!!

On the same note, there will be times when this technically advanced camera will require a factory reset, or you might accidentally forget username and password of your foscam Z2.

Here is what you must do if you forgot username and password of your foscam Z2:

?There are chances that your foscam application has not forgotten the password or might be still be logged in, so please open it immediately and check the setting part for password change.
?Just in the worst-case scenario that your application is not logged, you certainly need to factory reset your camera by pressing the reset button in your device's backside.
?A foscam factory reset procedure will bring back the default settings, which means the default password and username are back again.
?You can get the default credentials on the manual or official site of foscam and then log in to change it for better convenience.

For more search information, please contact us in the live chat section of foscam.

https://foscam-support.com/

Option 1, How to Hard Reset Nokia E7 with Software Menu:

1. Turn On Nokia E7
2. Go to Menu: Menu > Settings > Phone > Phone management > Factory settings > Delete data and restore
3. Nokia E7 will ask the default security lock code is: 12345
4. The rest will do by itself to master reset Nokia E7, this process will erase or wipe all important data

#Option 2, How to Hard Reset Nokia E7 with Hardware Button Combinations Key:

1. Before doing the master reset and format Nokia E7, you have to backup any important data
2. Battery Nokia E7 should full charge
3. Turn Off Nokia E7
4. Press and hold together: Volume Down Button key + Camera Button key + Menu Button key, after that continue with press Power Button (do not release the first three button)
5. The process will do format to factory default Nokia E7

#Option 3, How to Hard Reset Nokia E7 with Secret Security Code:

1. Make Sure Nokia E7 is already charge properly
2. Turn on Nokia E7
3. Press at Dial pad: *#7370# and wait
4. Nokia E7 will ask for default security code, enter: 12345
5. Nokai E7 will do format to factory default

How the Right Step to Flash and Restore Nokia E7 Unlock?
Have a good smartphone should know how to restore especially while the smartphone of Nokia E7 got problem. First step is do the soft reset first, if the Nokia E7 still get the problem, second try by doing the hard reset or restore to factory default with some options step above.
What should I do to Fix forgot or Lost Password of Nokia E7 Default Security Code?
If you never change the Nokia default security code is 12345, maybe sometime you every change the default security code and you forgot what you have change, in this case you have to go to nearest authorize service center for repair Nokia E7.
How to Restore Clean Setting at Nokia E7 Reinstall the Operating System?
Restoring the Clean setting of Nokia E7 can be done with doing the soft reset without delete any important data. If you want to reinstall clean operating system for Nokia E7, this can be done with doing the hard reset, but your data important will be deleted.
Help for Slow Respond Nokia E7, How to Make Nokia E7 Run Faster?
It will hurt to use slowly Nokia E7 smartphone, maybe it have a lot of applications or you ever try to setting the Nokia E7 with wrong way. This problem can make our Nokia E7 running slowly, so to make Nokia E7 run faster, you can try to do the soft reset and also hard reset. It depend on what the main problem with your Nokia E7.
How to Fix Forgot Nokia E7 Pin or Password ?
If you assign a pin or security password for Nokia E7 and forget about it, you have to do the hard reset of Nokia E7 with step above
The information from this page describe about nokia e7 hard reset,hard reset nokia e7,how to hard reset nokia E7,how to format nokia e7,how to reset nokia e7,e7 hard reset,hard reset e7,nokia e7 format code,nokia e7 hard reset button,how to unlock nokia e7 security code. If you need another resource for hard reset, use search function at this homepage or find from our related posts.

John,

If you cannot remember the password, then you will have to reset the router. There is a small reset button either on the back or bottom of the router. Using something small (pen, pencil, paperclip, etc), press the
There should be a small You'll need something like a pen or pencil to push it in. Push it, hold it pushed in for about 5 seconds, release. After that, the router should reboot and you can access the router menu by typing 192.168.1.1 in your browser.

The default user name and password depends upon your device type. If you are not sure, look at the data label on the unit. Google [your router name] default user name and password. You should find a result that will provide you with what you need to access the administrator menus.

Unfortunately, when you reset your router you will lose all your programmed information which you will have to reprogram.

Probably not what you want to hear, but you will once again have control of your router.

my micro sd card has been dlocked by me on my nokia x2 02 mobile and this is not unlocked by any default key please help me.

Default User and Password on Everfocus is usually
Admin
Admin

Nevertheless, you should contact your local distributor, and after providing the product serial number, they can generate a reset user and password, that shall be used only once, and then, you must enter a new user/password combo.

Some things to Try:

Installer Master Code 1397 Selecting this accesses the Main menu. If the menu is locked, you may need to unlock first. To unlock the menu: Select the area the password will be typed and a digital number pad will appear. Type in the password. The default password is 123456. Once you have typed in the password, press the enter button to close the digital number pad. Click "APPLY," if the password is correct the main menu will open. Unlock Menu Prompt Password Setup This menu selection allows you to change the device ID, enable password protection as well as set a new password for users and admin on your DVR. When you enable password protection, you will be prompted to insert a password each time you wish to access the main menu. The DVR will automatically log the user of admin out after 60 seconds. To Change the Device ID: 1. Select the box next to "device ID" and a keyboard will appear. 2. Type the name you would like then select enter to close the keyboard. 3. Select "apply" to save your changes. To Enable Password Protection: 1. Select the scroll bar next to "password enable" and list will appear. 2. Highlight and select "On" to turn the password enable on. 3. Select "apply" to save your changes. To Change the Password You have the option to change the password for user and admin. A user will only be able to access the search menu to view saved footage, whereas an admin will be able to access anything in the menu. Both default passwords are set to 123456. 1. Make sure password enable is set to "ON". 2. Select the ****** box next to the password you would like to change and a keyboard will appear. 3. Type the password you would like then select enter to close the keyboard. 4. Press "Menu" and highlight "Next" to confirm. 5. Type in the same password again, next to "confirm" in order to confirm the password then select enter to close the keyboard. 6. Once you have entered the desired password, select "apply" to save your changes close the keyboard.
HOPE THIS HELPS!~

c:\windows\dvr2 i think is the file that saves the password

joed_calcule

If you changed the password from the default one but forgot the one you set it too all you really can do at this point is set the printer back to the factory defaults. The menu options below will help you do this.

Advanced Printer Settings

Settings tab

Resets = Change all the printer settings back to the factory default settings.

Let me know if you have any more problems or questions

Issken

hi... the default password stated in user manual for my DVDR3460H, is 3308.. if you've changed it to personal pin - use the restore factory settings option and it will return to the default pin and start again..

hope this helps, good luck

debij75