Hi! I have a 2006 HP High Def Plasma TV model CPTOH-0602, serial CNH6131576. It lost picture, I can hear sound. Wonder what couls be the problem?

Call a tv engineer to repair it for you.

Yes the TV requires a signal.....

I have the same problem with my HP PL4260N 42" Plasma HDTV serial # CNH6141988, model # CPTOH-0602. I have perfect sound and can change channels still with sound but NO PICTURE. I am a consumer with a question that need the advise of an expert.

Choose connections on the Panasonic that match those on the player--

Do you have on the player Component outs(blue,green,red and 2 audio which are red and white? This ought to give you the best picture and sound.

Other inputs to the set must match the ones coming from the player--Most owner manuals have a lot of details here.

If the player has 1080 output hook to a similar input on the set.

Some advice here: make the connections between units with both turned off.

u blew a backround bulb it sounds like

Check the post "Hp 42 plasma tv cptoh 0602 I get sound but no picture."

Did you try buying a new HDMI cable? You can also try some of the solutions in the post called "Hp 42 plasma tv cptoh 0602 I get sound but no picture."

Mine has done this from day one, appears to be a resolution problem. All I do is go to a HD channel let it tune in and then go back the the SD channel and don't have to worry about it until next time the power has cycled.

You probaly have a bad y or z sustain board

do you have your video pluged in to the tv or any thing elc if so unplug the video any see if that work or it could be your ampifier let me know how you get on thanks