I need the comcast remote code for a Proscan LED TV 40" PLDED4030A-RK

If it is the original remote control to Comcast Cable box; there is no need set it up with a code. It might have been already set. Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

Comcast has a web page with the newest codes. If the codes listed won't work, the page tells you how to code scan.
start here:
http://customer.comcast.com/remotes/ Comcast Remote Codes Program Your Comcast Remote Control

I had the same problem. I have the 40 inch Proscan and they supplied a remote control guide for comcast. It was only 4 digits and it did not work. I called Comcast and they did not know. I found it needed 5 digits so I added a 1 and it worked The code is 10178. Hope it works for you.

You mostly have to go through all the numbers to find one that works. Sometimes, with an off brand TV I have the best plasma i've ever owned right now. It's not a fancy brand name and the remote ( Comcast ) wont work for it. The comcast guy said that it would not work with my TV. Hope ite helps. You may not be able to pair the two at all.

I had the same problem and code 0178 worked for me. It isn't anywhere that the other codes are on the internet, I just found it on a message board somewhere.

Good luck and I hope this one works.

10178, 10029, 10030, 10019.....will work or call proscan 888-977-6722..I had the same problem with my new 40 proscan and the comcast remote

I was having the same problem with my 40" Proscan Tv. I had to go to Comcast and get the remote with the gray OK button instead of the red. I could program my DVD player with a 4 digit code so this remote worked when I put in the 4 digit code Proscan sent with the TV (0178). This was the only solution I could find . They do have the remotes with the gray button but you might have to be very persistant to get one with the codes for the rest of your electronics.

The code 11178 worked for us for our Comcast remote.

Lauren