SOURCE: I am running windows 7 , however I cannot get my
Check out whether you are running 32 or 64 bits.If you are running Windows at 64 bits, you may not have enough memory to actually manage it. 4 gigs of RAM is the norm for 64 bit installations. This is more likely if you upgraded and didn't buy your computer with 7 preloaded, but you should have gotten a caution message during installation if that was the case.
Go to start, computer, and then system properties. Then look at whether you are running X64 edition. If you are running x64 and don't have enough memory or a fast enough chip, that can create problems. That usually takes the form of crashes during games and other graphic intensive programs. If that is the case, you might have to change your Windows installation.
Make sure that you go to Microsoft update advisor and Broderbund's printmaster updates to make sure you have the latest drivers. Usually, if you go to help in the program menu there is a way to update automatically. It may be under about or something like that. Printmaster was designed to work at 32 bits, but most programs will run on 64.
Hope this helps, leave comments if you have more questions.
SOURCE: Print Master Gold 16 compatible with Windows 7?
Compatibility Wizard
1. Open the Program Compatibility Wizard by clicking the Start button , clicking Control Panel, clicking Programs, and then clicking Use an older program with this version of Windows.
2. Follow the instructions in the wizard.
If you cannot install a program, insert the installation disc for the program and, using the wizard, browse to the program's setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.
To change compatibility settings manually for a program, right-click the icon for the program, click Properties, and then click the Compatibility tab.
SOURCE: problem loading Print Master gold 10 on windows
As I just posted on http://www.fixya.com/support/t2129564-printmaster_platinum_10_version_will_not I was able to get PrintMaster Platinum 10 to install on Windows Vista by right clicking on E:Setupis_Setup.Exe->Properties->Compatibility->Run this program in compatibility mode for Windows XP (Service Pack 2) and then running E:Setup>is_Setup.Exe FullSetup.ini from the command prompt.
SOURCE: I have the print master
All you need to do is download & install Windows XP Mode for Windows 7
http://www.microsoft.com/windows/virtual-pc/download.aspx
Once installed you will be able to run all your favorite old programs , if you run into any compatibility issues , right click on the .exe file & select "properties" , compatibility mode , & select the settings your program is known to work with .
After all this if you still can't run the program , try using " virtualbox " or " vmware virtual machine " & install a copy of windows xp as a virtual machine .
126 views
Usually answered in minutes!
×