How to setup tp-link td-w8960n for chromecast

You need to read the manual here.

http://www.tp-link.com/Resources/document/TD-W8960N_V3_User_Guide.pdf

It needs power and the router plugging into the line via the line socket.

A Ethernet cable needs to plugged into one of the WAN ports to configure the router, the other end needed to be plugged into a pc.

check your inter net cable firs
t turn off box reconnect inter cable turn on box or reboot from menu

The line speed is controlled by your internet service provider, not by your router. If you have something like AT&T as your internet service provider, then they sell 3 or 4 different line speeds or packages. The cheapest will get you the slowest line speed. So if you have a 300mbps router but you purchased AT&T's cheapest line speed it will never allow you to do downloads, uploads or streams at 300mbps. You gotta Pay to Play. :)

Unplug your router from the outlet then plug it back again to reset it.

To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

please refer the user guide http://www.tp-link.com/resources/soft/20113821345217.pdf
It helps to configure

check all of your cables, and check internet connection

What the problem? i'm also using this router...
how you setting the router?using wifi or LAN?
BEFORE THAT,
DOWNLOAD HERE

RUN INSTALLER FIRST BEFORE CONNECT TO YOUR ROUTER.
connect line rj11 to link dsl,rj45 to your pc/laptop.(dont use wifi to setup the router)
then plug the power and ON the wifi router.
After that, check light for ADSL, WLAN INTERNET AND PORT(1 OR 2 OR 3 OR 4) IS BLINK

..IF light is okay and blink, then you can setup the utilities.
Is easy. TP-LINK get ready with software that you can setting the router as like professional with the secure encryption. For receiver I'm preferred you using tp-link also. Then you can use QSS function only just click button QSS..

You can download from here.

http://www.tp-link.com/support/download.asp?a=1&m=TD-W8960N

Darren,
Open the web browser and type the IP address of the router (default is 192.168.1.1) into the address bar and then Press Enter. Type the username and password in the login page, the default username and password both are admin. Click the Security,Firewall on the left of the page. Open link below to see all the steps.

How to configure IP Address Filtering on TP LINK 11G wireless Router

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&uact=8&ved=0ahUKEwjTxomI5IfLAhVD_R4KHWFABB4QFggiMAI&url=http%3A%2F%2Fportforward.com%2Fenglish%2Frouters%2Ffirewalling%2FTP-Link%2FTL-WR841N%2Fdefaultguide.htm&usg=AFQjCNFgiLyGa2iJJKzG6Cc_wp7D7NCddQ

https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0ahUKEwjTxomI5IfLAhVD_R4KHWFABB4QtwIILDAE&url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DiJiT76G3yV4&usg=AFQjCNFweKqwkUSoT-45bwO0LZbYnT5G4A