Et1862 stucks in elogo and restart with a beep continuosly

See if the computer will start in safe mode.
Steps to get in to safe mode: Make sure the computer is OFF not in sleep or hibernate mode.
Start computer and tap on the F8 key till you see a text screen that gives you the: Start windows in safe mode with networking.
Select that startup. If the computer doesn't start and you get the same beep - Then you have a possible hardware related issue.
If the beep is actually a number of beeps - this would relate to your system memory. Hope this help you in figuring out your issue.

Have a great night.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/william_02fc2766c1e13b73

Gone mate. Your hard disk is dead. I think the head is damaged. You can't do anything. Unless you have another HDD from same manufacture, same size. you can replace card on HDD and have a go, otherwise forget that HDD.

the beeping sound, k some of the keypad might be the problem it stuck have check it from authorized service center, good luck!

First, check the memory (RAM) of your computer. remove and put it back in. Also checkif therre is only one or two memory sticks in, so you can check on both. It should work fine, and if not, try replacing the memory of your laptop.

HOw to reset the Fisher Paykel machine. Mine one keyborad working but machine doesn't function. Where is reset button please?

i sounds like a graphics problem but try and re seat the memory 1st. disconnect anything connected to the laptop, unplug it and remove the battery. remove the memory module(s) and re seat them. but the battery back in, plug it in and restart it.

reset bios setting.

Sounds like a keyboard error. Make sure there are no stuck keys and all cables are secure. Turn of pc before checking.

1. press menu and the middle key at the same time untle master restart starts

if you could send the serial number it will help me determine who manufactured it for sears and then point you in the right dirrection.