Lexmark all in one printer p6250 error code 1203

maybe your windows operating system is not suported

Use Vista Driver in Windows 7. Check your operating system if it's running on 32-bit or 64-bit. On your computer, go to Start menu > right-click on Computer > Properties. Take note of the System Type.
Use the link below to download and install the Lexmark P6250 Printer Driver: - Lexmark P6250 Driver for Vista 32-bit - Lexmark P6250 Driver for Vista 64-bit
Please follow the instructions on your computer screen.

1203 error indicates a communication problem with your printer and one of your cartridges. Please refer to this article in the Lexmark website: How to Troubleshoot a 1203 Error on the Lexmark X4250/X4270/F4270 Printers. This will help you identify and resolve the 1203 error message on your printer.

This article in the Lexmark website will help you identify and resolve the 1203 cartridge error problem: 1203 Error Message on the Lexmark X7170 All-In-One

Erro 1203 solution

1. open the front cover of the printer
2. wait for the cartridge carrier to be in the center..
3. remove the mono and color cartridge or printhead
4. clean the gold connectors or circuit on the printhead
next: power off the printer while the front cover is open .
5. then clean the printer cartridges carrier circuit ..especially those gold connectors....and reinstall the printhead or cartidges..
6. close the front cover and power up the printer..

Good Luck!

El error 1203 son un asunto que ocurre o cuando un cartucho es malo o la Ranura de cartucho de impresora es mala...
1 - intenta de limpiar los contactos de cobre de la ambas ranura de carritos y carrito en la impresora y tratar otra vez.. O 2 - cuando error aparece,
cierre el poder de impresoras lejos; espere un minuto y g?relo atr?s en copia de prensa.

Si necessita mas asistencia, permita que sepa. Si esto ayuda o resuelve el asunto, por favor lo valora y da una recomendaci?n para mi respuesta. Gracias, Jose

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

it is catridge error kindly replace the catridges.

It will be a hardware printing problem mostly. Try cleaning the parts with alcogol or/and elastic rubber. Also try to increase the force of contact with a sticky tape or like that.

Try the following link - http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:0:0:0

1. Enter your printer model
2. On the following page under "Search the KnowledgeBase" enter the text "error 1203"
3. From the results select "Troubleshooting a 1203 Error Message on the Lexmark X5450/X5470"
4. Follow the directions there and see if it solves your issue.

If not, you may want to try calling Lexmark Customer support.

It is a hardware printing problem . Try to clean contacts in printers in cartridge holder by alcogol and elastic rubber. it may become dirty an poor contact. after this you can try this:
Put some layers of the sticky tape on cartridge to improove force of contact.