Question about Cannon Office Equipment & Supplies
Screwed on the nut
You need a service manual for this to basically guide you on how to remove the old roller.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Posted on Nov 26, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
E 051 problem is registration horizontal position gear is broken. this gear seem to paper pick up deck back side. remove paper pick up deck and see one small moter and see small gear is there u change it u r problem is solved
Posted on Oct 01, 2008
yes it is providing it has a send kit installed on the machine, its called windows SMB scanning, and fairly easy to set up should be in your user manual on how to do it.
Posted on May 20, 2009
A E000 code means the error history has detected any one of the following error codes 4 times :E001;E002;E003.
Here's the definitive reset procedure
Press Additional Functions key
Press > to #7 Printer Function
Press > to #4 Printer Reset
Unplug printer and repower it.
please rate my answer after trying if satisfied
Posted on Jul 06, 2009
E002/E000/E003/E261/E733 Error code: Due to AC line noise Error Code
Symptom E002/E000/E003/E261/E733: due to AC line noise. Description E002/E000/E003/E261/E733 occur due to AC line noise.
If the above error codes are frequently recorded in the error log, they might concern AC line noise. Cause When the machine tries to detect a Zero-cross signal of AC line, it will fail if a noise occurred around the zero-cross point. Since the fixing temperature is controlled based on the zero-cross signal, there is a possibility that the fixing temperature could not rise properly if a noise occurs several times. Field Remedy Replace the Switching Regulator PCB ***'y with a new one.
The circuit has been modified to resist a noise. REMEDY Caution
Press (* then 2 and 8 together then *)you are in service mode monitor:To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR.
GOOD LUCK MATE ......KINDLY RATE ME !!!! THANKS.
Posted on Sep 26, 2009
SOURCE: I have an error code
It means that the "reader" cannot communicate with the "printer". That is to say, your device theoretically could be purely a printer as a stand alone device. But, it knows it has a scanner and document feeder attached and therefore expects to easily communicate with these external devices. Please check the communication cables between the 'reader" and the the "print engine". If your copier has been moved or shoved recently, the communication cables may have been disconnected or slightly disengeaged.Power off the device using the "REAL" power switch. If You are in doubt on where the true power switch is, pull the plug. Locate the cable that the doument feeder uses to connect to the main copier. Remove and re seat this plug. This "should" fix the problem unless you have deeper, uglier, expensive problems.I truly wish you well, and can assure you that the communication problem is an accurate description of the code. But you of course understand that WE are hoping for the most simple problem as opposed to the distinct possibility that you have circuit boards that that don't want to talk to each other anymore or a wiring harness issue. I'll say a digital prayer for you. :-) SPINAL
Posted on Mar 02, 2011
Tips for a great answer:
Feb 14, 2015 | Cannon Office Equipment & Supplies
Jan 13, 2015 | Canon Office Equipment & Supplies
Nov 25, 2014 | Canon ImageRunner 3025 Black and White...
Nov 11, 2014 | Office Equipment & Supplies
Apr 28, 2014 | Canon imageRUNNER C6800 Copier
Sep 28, 2012 | Cannon Office Equipment & Supplies
Aug 19, 2009 | Canon Office Equipment & Supplies
Jun 10, 2009 | Canon (6981A002AA) for imagerunner 2200,...
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: