At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Well the research is sound and borne out by the clinical research. It is of use to breeders but more difficult with strays and giving them their daily medication. The traditional way of trapping and spaying is more guaranteed and a permanent solution.
<span>Instructional steps<br /></span>
Things You'll Need:
<ul>
<li>
<span>Syringes</span>
</li>
<li>
<span>Refill ink</span>
</li>
<li>
<span>1/16 inch thumb screw</span>
</li>
<li>
<span>Paper towels</span>
</li></ul>
<ol>
<li>
Place the cartridge on a flat surface over some paper towels to soak up any spilled ink.<br /></li>
<li>Drill a hole directly above the "H" in the word "Push" on the top label.<br />
</li>
<li>
Drill a hole above the the first hole so air can escape while you are filling the cartridge.<br />
</li>
<li>
Fill
a syringe with the correct color and amount of refill ink. The black
cartridge holds 25 ml of ink. Color cartridges hold 10 ml of ink.<br />
</li>
<li>
Insert the needle of the syringe into the first drilled hole. Slowly inject the ink into the cartridge.<br />
</li>
<li>
Replace
the cartridge into the Epson R340. Allow it to rest for 24 hours so the
ink can absorb into the sponge inside the cartridge.please rate this post by saying how helpful it is to you<br /></li></ol><span><br /><br /><a href="http://www.ehow.com/how_7414161_refill-epson-r340_s-ink-cartridge.html#ixzz13r3MVnYc"><br /></a></span>
Color Cartridge
1. Place the cartridge over somepaper towels in case there are any spills.Remove the label sticker from the topof the color cartridge.
2. Drill into the three small holeson the top of the cartridge to widen them so they will allow syringe needles.
3. Fill a syringe with 6 mL ofmagenta ink. Insert the needle into the refill hole that is located below thetwo protruding rectangles on the top of the cartridge. Slowly inject the ink.
4. Fill a syringe with 6 mL of cyanink. Insert the needle into the refill hole located below the large rectangleon the top of the cartridge. Slowly inject the ink into the cartridge.
5. Fill a syringe with 6 mL of yellowink. Insert the needle into the refill hole located below the small rectangleon the top of the cartridge. Slowly inject the ink into the ink chamber.
6. Replace the cartridge into theMX310 printer.
Black Cartridge
1. Set the cartridge on some paper towels.
2. Drill a hole into the dimplelocated directly above the semicircle on the top of the cartridge.Fill asyringe with 20 mL of black ink. Insert the needle into the hole and slowlyinject the ink.
3. Replace the cartridge into theCanon MX310.
Usually the refill kits come with instructions that cover many cartridges.
A lot of the lexmark's use HP style cartridges and those often you lift the label to access the fill holes.
FILL SLOWLY and do not over fill. Usually the cartriges hold so many ml and youcan measure that on your syringe. Knock off a few ml from what they say the cartridge takes.
×