I need the software for saa7130. i have the drivers but cant access the program to open the tv on my desktop. there is no desktop icon to use

click start all programs look for the phillips tv program if you find it right click on it you will an option to send to desktop to create shortcut if this fails click start search type in part or all of the philllips you are looking for to make sure the drivers are installed
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see your philips device or any device with a yellow question exclamation mark? ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver
you might find the driver you need here
http://download.driverguide.com/driver/SAA7130HL/Philips+Consumer+Electronics/d589691.html
or
http://members.driverguide.com/driver/detail.php?driverid=589691&action=winfo

hope this will be helpful

Hello the problem with your TV card is when you install in your pc you don't make a shortcut in your desktop try to go the local drive where you installed your TV card then in program files find for the folder of Philips then open it or double click the folder. Then you will see there the .exe file where shortcut of the program where used to run your software. Or right click on that icon and then click copy and minimize the folder then on your desktop right click and click paste. Hope it can help with your problem.

i need philips saa713x tv tuner card software

sent ur driver... maybe i can help u.

did you install the software for the card set card for tv did you look at the manual it came with you need to set the tv on a line to be able to see it check the vcr setup for card jim

There are now several versions of the basic Futura software and AutoPunch available on the market. The most current is version 1.0.0.2. To determine what version of either software you have, you will find this information around the inside rim of the CD at approximately 4 o'clock. Before loading any of the Options into your computer, check the version and then follow the steps below. The following steps will update your software so that you will now have the latest 1.0.0.2 version of the basic program and all options.

To load base software 1.0.0.0 with AutoPunch 1.0.0.0 or base software 1.0.0.1 with Autopunch 1.0.0.1

• You must use bobbin part number 085128. This bobbin is specifically designed for the Futura CE-100 and CE-200.
• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off the machine
• Install Autopunch and leave the CD in the tray
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program
  

To load base software 1.0.0.0 with AutoPunch 1.0.0.1 or base software 1.0.0.1 with Autopunch 1.0.0.0

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off the machine
• Install Autopunch and leave the CD in the tray
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program

To load base software 1.0.0.0 or 1.0.0.1 with Autopunch 1.0.0.2

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close software and turn off machine
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Install Autopunch using Installation Wizard - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.2 with Autopunch 1.0.0.0 or 1.0.0.1

• Load Base software (have machine set-up for embroidery with USB connected to both machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and turn off machine
• Place Autopunch CD in tray but CANCEL Installation Wizard
• Download appropriate update for Windows Version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop download icon to install update
• Turn on Futura Machine and double left click to open the program
• Type in Access Code from Autopunch jewel case and then left click on check mark to open program

To load base software 1.0.0.1 with Autopunch 1.0.0.1 with Hyperfont 1.0.0.2 or Photo Stitch 1.0.0.2

• Load Base software (have the machine set-up for embroidery with USB connected to both machine and computer - machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off the machine
• Install the Autopunch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in the Access code from Autopunch jewel case and then left click on the check mark to open program*
• Close program and then turn off the machine
• Download appropriate update for Windows version from the Futura-Support.com updates and save to desktop
• Double left click on the desktop icon to install update
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off the machine
• Install HyperFont program - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from HyperFont jewel case and then left click on check mark to open program*
• Close program and then turn off the machine
• Install PhotoStitch program - leave CD in tray
• Turn on Futura machine and double left click to open program
• Type in Access Code from PhotoStitch jewel case and then left click on check mark to open program*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

To load base software 1.0.0.2 and adding all Options - Hyperfont 1.0.0.2, PhotoStitch 1.0.0.2, Autopunch 1.0.0.2 and Cross Stitch 1.0.0.1

• Install Base software (have machine set-up for embroidery with USB connected to both the machine and computer- machine turned OFF)
• Turn on Futura machine and double left click on Futura icon to open program
• Close program and then turn off machine
• Install Autopunch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from AutoPunch jewel case and then left click on check mark*
• Close program and turn off machine
• Install Hyperfont program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from HyperFont jewel case and then click on check mark*
• Close Program and turn off machine
• Install Photo Stitch program and leave the CD in the tray
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from PhotoStitch jewel case and then left click on check mark*
• Close program and turn off machine.
• Install Auto Cross Stitch program and leave CD in tray
• Download appropriate update for Windows version from the Futura-Support.com updates (Fut_sp2_Options.exe) and save to desktop
• Double left click on the desktop download icon to install
• Turn on Futura machine and double left click on Futura icon to open program
• Type in Access Code from Auto Cross Stitch jewel case and then left click on check mark*

* Must open the program after installing each Option with CD in tray and type in Access Code before installing next Option.

Driver http://www.lifeview.com.tw/drivers/pci_card/FlyTV_Prime/Drv._3.25.zip

Tvr 3.5 http://www.lifeview.com.tw/drivers/pci_card/FlyTV_Prime/TVR_325.zip

for this card do not use the honestech software you can get the software drivr bundle from below

SAA7130

Please find the link for downloading the drivers.

http://members.home.nl/fly2000/download_e.html

Rate the solution as Fixya !

Rgds,
AD

email me [email protected] I have the oem cd, we can tried to send you a copy or maybe we can do it through the internet. Please in the email greeting section type this: OEM Cd for Philips SAA7130 drivers and Software. Otherwise I won't open the email from safety reason no virus or spyware you know.