Basically, the dishwasher was working fine up until a couple of weeks ago when it just will not fill with water; it drains fine having filled it with water manually and switched on, all the water gets drained away. I've replaced the aqua stop tube as I thought this was the problem as I could see the voltage being sent to the tube to open the valve (used multi-meter) but it did not let any water in. Same problem after buying & fitting a new aqua stop tube. I've now opened up the sides as well as the back and I cannot see any obvious reasons for the problem. The lights flash in so-called sequence 1 which is the water inlet fault.... Water is definitely coming out of the pipes to the aqua stop tube as I switched the tap on and happily got lots of water pouring out before I reconnected the tube and continued on.....
675 views
Usually answered in minutes!
×