Question about Nordic Track NordicTrack C2050 Treadmill Walking Belt

1 Answer

I have a NordicTrack C2050. The belt abruptly stopped moving. I can hear the motor running but nothing is moving. I have had this machine for several years with no problems. Your thoughts are grea

I have a NordicTrack C2050. The belt abruptly stopped moving. I can hear the motor running but nothing is moving. I have had this machine for several years with no problems. Your thoughts are greatly appreciated. I miss the treadmill!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 3,698 Answers

Check bewlt for bad bearings/dirt in bearings etc. replace drive belt.

Posted on Oct 21, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 40 Answers

SOURCE: Nordictrack motor will not run when start button is pushed.

Likely the cover of one of the motor brushes popped off. Unplug the machine before you pop it back in place, then try it again.

If that doesn't work, most likely it's the motor control board, or possibly the console, or finally just a loose connection behind the console.


But most likely, it's the motor brush cover. I've been seeing that alot with this model.

Posted on Nov 01, 2009

  • 95 Answers

SOURCE: Nordictrack C2050, belt was slipping and I got the

I am not an expert on what you may need to order but I do want to give you a link in case that may be helpful... FitnessRepairParts.com has parts lists for several versions of the C2050... look for a decal or label on the machine to get the exact model number, then click on that model and look in the list for 'Roller, Front' or 'Roller, Rear' or 'Treadbelt.' Hope that helps.

Also if you need someone to come look at it you can find a list of servicers near you here

Posted on Feb 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a NordicTrack C2050 treadmill that has abruptly stopped?


see if you can remove the motor hood and look at the drive belt. it is a little belt from the motor to the front pulley to turn the walking belt. its either broke or fell off

Oct 21, 2014 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

Error codes 660 & 595, all functions perform, new motor from Icon, but motor will not go


please test the output voltage from control board motor, for voltage measure in terminal motor, if there are NOT voltage in output the control board is faulty.

2) Test if there are voltage terminal motor, if there are the motor need to be test. Loose the belt and try again. and if the motor RUn YOU need to LUBE the deck belt board.

God bless you5e2ea095-36ba-4f94-afdf-20841fd60f32.gif

Oct 15, 2013 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

Error code 660 & 595


test the output control board motor, if there are NOT voltage for to input voltage terminal motor, the control board is faulty, replace.
2) If there are voltage terminal motor, the motor need to test, take out the belt, and try again if the motor RUN the problem is deck belt board, LubE IT. see my personal TIPS for motor.
God bless you4cb99e81-e869-4dd9-8681-5765dcf60598.gif

Oct 15, 2013 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

Treadmill belt stops abruptly


This happen because the lack of LUBE in the machine according with the instruction maintenance.
Please see the video and proceed according , LUBE the rollers bearing too.
God bless you

Jan 07, 2013 | Nordic Track Nordictrack A2350 Treadmill...

1 Answer

C2050 belt does not turn


LUBE THE deck belt inmediattely, maybe you have WORN deck belt
2) LUBE the rollers bearing too
3) test the drive belt motor for worn, replace or adjust it
4) test the input voltage motor, if there are the motor need repair, See my personal TIPS.
5) Test the output voltage board, for input voltage motor, if there are NOT the board is faulty.
God bless you
11_28_2012_12_03_43_am.gif

Nov 24, 2012 | Nordic Track Nordictrack C2050 Treadmill...

1 Answer

My exp1000 stops abruptly...if you are not holding on, you could topple off...help


this happen because lack of maintenance schedule.
LUBE inmediately the DECK BELT, the machine Stop, BECAUSE has a protection system for electronic component.Maybe you have a worn DECK BELT, time to change it.
2) LUBE THE rollers bearing too.
3) Measure the input voltage motor, if there are the motor need repair. see my personal TIPS.
4) measure the output voltage board, for input voltage motor, if there are NOT the board is faulty.
see the b.diagram + video and proceed
God bless you
10_13_2012_12_05_17_pm.gif

Oct 12, 2012 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

My Nordictrack X9i treadmill console says it is operating at speed, however the track is not moving. Occasionally the belt will move for just a moment then it stops.


do you hear the motor running but the belt is not? if it is the belt need tightened or the drive belt may have broken. remove the motor hood to inspect

Aug 23, 2012 | NordicTrack Exercise & Fitness

1 Answer

While using my Nordictrack a2550 this morning, the walking belt began to slip very badly. I checked the alignment and adjusted the tension of the belt as per the user's manual but the belt stills slip...


if it really is the walking belt that is slipping keep tightening the adjustment screws till the belt will not slip when you try to stop it ( set speed to about 3 and then with your foot try to stop belt from spinning - you should be able to make the motor and whole machine come to a stop ) make sure it is really walk belt spinning and it isnt the motor belt slipping. (if it is motor belt slipping when you try to do the stop the belt trick i just described you will see the walk belt and front roller stop but still hear the motor turning) once you get walk belt tight enough so it doesnt slip then you can worry about keeping the belt centered.

let me know if you need more help on this and let me know how the stop the belt test went

good luck!

Mar 25, 2011 | Nordic Track NordicTrack A2550 PRO...

1 Answer

Nordictrack C2050, belt was slipping and I got the cover off. and black stuff is all around the belt moving the roller that moves the treadmill. When I walk on it the belt would shuffle and sometimes the...


I am not an expert on what you may need to order but I do want to give you a link in case that may be helpful... FitnessRepairParts.com has parts lists for several versions of the C2050... look for a decal or label on the machine to get the exact model number, then click on that model and look in the list for 'Roller, Front' or 'Roller, Rear' or 'Treadbelt.' Hope that helps.

Also if you need someone to come look at it you can find a list of servicers near you here

Feb 17, 2011 | Nordic Track NordicTrack Treadmill, A2550

Not finding what you are looking for?
Nordic Track NordicTrack C2050 Treadmill Walking Belt Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...