How to connect equilizer to mcintosh mac6700 receiver

On the back of the 6700 - remove the links between Output 1 and Pwr Amp.

Use some phono/RCA cables. Connect from Output 1 to the equalizer's Input. Then connect from the equalizers Output to the 6700's Pwr Amp sockets.

How to Hook up an Equalizer

The above link describes how to hook up the equilizer to the receiver.

It sound like you have a shorted wire, or possibly it isn't connected.

Hi there:
You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa

Let's try this for a third time. Bose AMP OUT to Yamaha MD/TAPE IN.
Bose AMP IN to Yamaha MD/TAPE OUT.

Please rate this solution.

this link might help you:
http://www.diymobileaudio.com/forum/diyma-sq-forum-technical-advanced/52358-mcintosh-mx406-manual-pdf-wiering-help-please.html
regards

Hi Friend,
Please go through following link:
http://www.berners.ch/McIntosh/Downloads/MC7106_own.pdf

Try asking the McIntosh Technical Support.

http://www.mcintoshlabs.com/owners/default.asp

Sheilah

Try this link,

http://akdatabase.org/AKview/albums/userpics/10004/MC602%20Owners.PDF

Scroll down to the top of page 8.

Sheilah

If you plan to use them with a home theater, you will need a seperate amplifier, as most a/v receivers don't have tape monitors. With an integrated amp hook rec out to the input on eq hook output on eq to playback on tape mon. with seperates hook pre amp out to input on eq, output on eq to power amp input.