Flashing colours on screen

in printer setting there may be a cartridge detect tab try it.

This is a normal phoneme. The camera wants to show you where the picture is overblown. In these parts you can't see any details, because in JPG it will show it one colour. Most of the time this will be complete white.
When you are shooting in RAW (NEF in your Nikon) most of the time you still get detail, when you work in one of the RAW editors, like Photoshop, DxO and other picture edtors.

1. Go to Devices and Printers
2. Right click your printer icon
3. Select printing preferences
4. Click maintenance tab
5. Click Epson Status Monitor
If the show service required then your printer counter needs to be reset. Go to nearby Epson service center and have them reset your printer counter.

did you get this fixed? My tv has started to do the same

My suggestion is to try to reset to factory settings.

You may have accidently affected an exposure timing setting.

Or just try to use it in an automatic mode.

I sounds like a setting, since indoor flash pics are good, as you say.

1 .first download phoneix service
2 .open it
3. In Phoenix, click File>Manage Connections.
4. Now click New.
5. Now select the type of cable you are using. If you are using DKE-
2, CA-53 [N-Series] cable, select USB.
6. Click Next. It will find your product and say FOUND. If it doesn't

find any, you can try changing your cable type by clicking Back.
7. Click Next and then Finish.
8. Now your cable type [USB] appears in the connection list. Select

it. Click APPLY and then CLOSE.
9. Now select File>Open Product.
10. A list of RM code will open. Select your phone's RM code. Like

RM-133 for Nokia N73. Click OK
11. Now select File>Scan Product.
12. Your phone's firmware info will appear at the extreme bottom of

the Phoenix window.
13. Now go to Flashing>Firmware Update.
14. A window will open.
15. On that window click Browse button [the one with three dots].
16. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
17. Click Ok.
18. Click Refurbish.

19. Now your actual flashing has started. Don't touch your phone or press any button until the flashing has finished. Also don't touch your data cable and your computer system.
20. At the end Phoenix will tell you to remove your phone as the

flashing has finished.
21. Now wait for your phone to reboot into latest firmware.
22. The flashing procedure takes 8-9 minutes, a lot faster than Nokia
Software Updater.
Flashing dead phones [Which show only white screen on startup]
Note: You can install any firmware in dead phones whether it is latest and
or the old one.
1. The procedure is the same for flashing Dead phones.
2. Start Phoenix. Connect your phone with USB Cable [phone is off
at this time].
3. Click File>Open Product. Select your RM code from the window
that appears. Click OK.
4. Click File> Manage Connections. Select No Connection. Then

APPLY and CLOSE.
5. Now straight away click Flashing>Firmware Update.
6. A window will open. Click on Browse button [the one with 3 dots].
7. A window will open with various products and various regions.
Choose the region or country of your choice according to the
language pack you want to install.
8. Check the option "Dead Phone USB Flashing".
9. Click Refurbish.
10. Flashing has started.
11. After some seconds flashing will pause asking you to turn your

phone ON.
12. Press POWER button of your phone until backlight comes up.
13. Flashing will proceed.
14. Your phone will automatically start when the flashing finishes.
After finish you can safely remove your data cable from h

use any color cartridge that is no sort & see canon error e5 solution

Hi,

My Sony digital camera 8.5 mf not taking the picture. When open the flash door. it shows blank screen. While trying to take photo it flashing light is working fine but no photo absorbed image.


Any know how to resolve this issue.

Please remove the batteries from the camera and wait 20 minutes if possible set to factory setting .

I have the exact same problem !!! I wish someone would be able to help with this one !