KitchenAid KUDS30IXSS Builtin Dishwasher Logo
A
Anonymous Posted on Oct 18, 2014
Answered

<!-- from fixya rte -->Run a service test for kitchenaid dishwasher - KitchenAid KUDS30IXSS Builtin Dishwasher

1 Answer

Ronald Rissel

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Master:

An expert who has achieved Level 3.

  • KitchenAid Master 715 Answers
  • Posted on Jan 20, 2015
Ronald Rissel
KitchenAid Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Master:

An expert who has achieved Level 3.

Joined: Oct 21, 2010
Answers
715
Questions
1
Helped
258334
Points
1075

Did you check behind the toe-kick panel for the tech data sheet? Assuming that you have checked and that it is missing, there here is the "secret keystrokes" that will make most Whirlpool/ KitchenAid/Kenmore/Maytag diswashers enter the diagnostic cycle:
Heated Dry - Normal - Heated Dry - Normal; or
High Temp - Air Dry - High Temp - Air Dry; or
Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy Saver Dry; or
High Temp Wash, Heated Dry, High Temp Wash, Heated Dry.

Note: On some of the newer Whirlpool, Kenmore, KitchenAid dishwashers, you start the diagnostic cycle by rapidly pressing the 3 left-most keys in the following sequence: 1 2 3, 1 2 3, 1 2 3.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why is my Kitchenaid dishwasher model KUDS01DJSS0 pump making loud humming noise? Pump motor suddenly began making loud humming noise when running. (not so bad when draining).
Some dishwashers have a soft food disposal inside. If something is hung up, it will grind or hum for a long time. If this is the problem, it will eventually go away.
Read full answer
Jun 19, 2020 • KitchenAid Dishwashers
0helpful
1answer

Kitchenaid dishwasher, 2009, KUDS50FVPA0. Prewash is fine - water circulates, etc. But, at main cycle, 25% of the time there is no water present; impeller running fine. Reset temporarily corrects.
This dishwasher have learning control board check your screen filter bottom middle inside make sure it's clean you need to run unit try self diagnostic mode just consentrate on first error message need to found out what is it fix problem and reset control by running diagnostics mode u should found service paperwork on inside of kuckplate (bottom penal holds by two plastic clips or 1/4 " screws
Read full answer
Feb 15, 2019 • KitchenAid Dishwashers
0helpful
1answer

Have a kitchenaid dishwasher and it wont run,the normallight and the cancel light is blinking
First, I'mn ot a Kitchenaid Representative.
* Check your warranty. Call for support.

*** following for imfomation only.***
* Reset; https://www.google.com/search?q=kitchenaid+dishwasher+reset&ie=utf-8&oe=utf-8&client=firefox-b-1-ab
* Reboot; https://www.youtube.com/watch?v=XJnzzXJcOV4
* Not running full cycle; https://www.youtube.com/watch?v=QTr0HSwuCCw
* Control Locked; https://www.youtube.com/watch?v=BZUUR39bawY
* Error codes; https://www.youtube.com/watch?v=Ti48mP2ShKk
* Starts then stops; https://www.youtube.com/watch?v=Okfns8OoR1g
8 Reset button?; https://www.youtube.com/watch?v=113SZ39zmtI
* Cleaning filter Part1 (of 3); https://www.youtube.com/watch?v=Wttz4fB1yVs
* Note; opening internal (of box) may void warranty. Call for service.
Aloha, ukeboy57






Read full answer
Jul 27, 2018 • KitchenAid Dishwashers
0helpful
1answer

I have a Kitchenaid dishwasher with stainless steel inside and I am having trouble with white residue on my plastics and flatware. What can I do to prevent this?
it's either:
  • a problem with water softener if you have one. get it serviced.
  • water is too hard and you don't have a water softener, check water hardness and install water softener if necessary
  • too much detergent used, try using less
  • too much or too little rinse aid liquid used. Adjust, test, repeat ;)
Hope this helps,
Vlad
First Choice Appliance
Read full answer
Sep 14, 2010 • KitchenAid 24 in. KUDS01FLBL Built-in...
1helpful
1answer

KA: KUDI0 w S/S tub 6 years old. Used only 2-3 times a week. When she runs the DW, there is a smell of burning plastic (wire insulation). It runs fine so far
Better open the back cover and give a visual inspection! If there are loose terminal joints on the heater it may create intermittent joint and thereby heating the terminals and the wire.

Switch OFF the machine, remove the plug and test. Look for discoloured wire insulation. Correct it. Take assistance from the service personnel, if you find it difficult.
Read full answer
May 18, 2010 • KitchenAid 24 in. KUDI02IR Built-in...
0helpful
1answer

Water in bottom of dishwasher after cycle
as ur dishwascher is brand new why not call the service and get the, solve the problem.....or u can go in touch with the store u bought the dishwasher and ask them to fix it....i think it will be under warranty being new
Read full answer
Mar 14, 2009 • KitchenAid 24 in. KUDI01FLSS Stainless...
5helpful
1answer

Kitchenaid kudso1dlss3 clean light flashing cannot do a new cycle
I do not have the same model as you, my model is KUD01ILBS6 but I have the same problem. A service tech told me it was a error code and here is how to fix it.

1 open the dishwasher door
2 hit high temp scrub button
3 then hit energy saver dry button
4 do step 2 & 3 again
5 close the door
6 hit the cancel button
7 you can hit cancel button again then try to start your dishwasher

This works for me, you may have to do this every few months because there is a glitch in kitchenaid where if the water temp is not sensed right it will keep the dishwasher from working. It took me 3 service calls to find this out.
Read full answer
Jan 17, 2009 • KitchenAid 24 in. KUDI01FLSS Stainless...
1helpful
1answer

Lights flashing on clean. Program does not take.
you can open the lowe racess panel of d/w and you find a techsheet/ trouble shooter, in ther they will explain how to reset a clean light blinkin 7 times.. you can try pushing the "sani-rinse"---"heated dry"--- "sani-rinse" --- "heated dry"... toggling these buttons will triggor a test mode, youl know your in it for all the lights will light, close the door and wait 30 secs or so, the reopen door and cancel cycle, after it runs for 2min it will be ready fro you to start using again.. of the clean light issue returns, id recommned calling for service
Read full answer
Jan 07, 2009 • KitchenAid 24 in. KUDS01FLBL Built-in...
1helpful
2answers

Kitchenaid double-drawer dishwasher will not start
i just installed a used dishwasher. It filled up with water then stopped. The lights are still on as far as the cycles but nothing is happening. I did the factory diagnostic test and the service diagnostic test, not sure how long each test was supposed to take because after it seemed to go through each cycle by the lights on the front nothing else happened. I waited over 30minutes because I didn't know how long this was going to take. When all the lights on the front went out I tried to turn it on like to run a wash cycle and nothing is happening and the bottom is still full on water. HELP!!

Read full answer
Oct 24, 2008 • KitchenAid 24 in. KUDS01FLBL Built-in...
1helpful
2answers

Kitchenaid dishwasher service manual
Water leaking from tub above motor. Is there a schematic online to show how to replace seal?
Read full answer
Mar 08, 2008 • Dishwashers
Not finding what you are looking for?

View Most Popular

KUDS30IXSS Builtin Dishwasher

  • Dishwashers

Related Question

Why is my Kitchenaid dishwasher model KUDS01DJSS0 pump making loud humming noise? Pump motor suddenly began making loud humming noise when running. (not so bad when draining).

  • KitchenAid Dishwashers

Related Topics

1,710 views

Ask a Question

Usually answered in minutes!

Popular Questions

KitchenAid Dishwasher Door Pops open during cycle

KitchenAid 24 in. KUDS01FLSS...

Clean light flashing 7 times. Can't start the machine

KitchenAid 24 in. KUDI01FLSS...

How do you reset a KitchenAid dishwasher model: KUDE70FXSS4?

KitchenAid Dishwashers

Squeaky door

KitchenAid 24 in. KUDS01FLBL...

Quiet series 300 maytag water won't drain

KitchenAid 24 in. KUDI02IRBS...

Top KitchenAid Dishwashers Experts

Cindy Wells

Level 3 Expert

6686 Answers

Paul Carew

Level 3 Expert

3801 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...