I need the passkey 4 my Jabra 2050 '0000' and '1234' do not work

Try this... 1. Turn off the Jabra bluetooth. 2. Turn on by pressing Volume up + power button until the power light comes on steady. 3. Then turn bluetooth from your blackberry 8900 and make the bluetooth seen/available by other devices. 4. Search bluetooth in range...Look for Jabra BT2070 click then will ask you to put the code which is "0000" or "1234". 5. Then check if the steady light comes to blink...

You do need the passcode. It should "auto pair" but the default passkey or pin is 0000 (4 zeros.)

Here is a link to the user manual
http://www.jabra.com/sites/Jabra/GNimages/Products/WirelessHeadset/BT2010/Documents/UM/VBT185z_UM_6198.pdf

Headset Pairing Readiness Instructions:

1. Fully charge headset for two hours.

2. The headset will automatically go into pairing mode if no device has

been previously paired.

3. Set your mobile phone to 'discover Jabra VBT185Z'.
4. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK.

dw

you need to intorduce again the jabra blutooth to your device. deleting jabra from the list make it forget the connection.

set your jabra to find mode by pressing the poer button for more than 5 seconds wait to blink, and find it using your device. it will again ask for a passcode and it will connect afterward.

Try putting in 1111. It still will not engage. But after you do this it will reset. Then put the 0000 in and you will be connected.

Hi,

The numeric passkey is 0000 (4 zeros).

For more details, download the instruction manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

my jabra handset is not connecting with my blackberry 9530

It's '0000'.
Hope it works for you.
Regards, Carlos

You need to pair your Blackberry with your headset.

1. Turn on your Blackberry's bluetooth and search for bluetooth devices.
2. While the Blackberry is searching and the headset is off, press and hold the call/end button on the headset until it's light glows steadily. Do not let go until the Blackberry finds it.
3. Pair the devices and allow the headset to connect automatically.
4. Default passkey is 0000.
   
5. To connect, press and hold call/end button on headset like the one in step 2.
   

where can I find the setting on my Blackberry Curve to pair my Jabra VBT185z

Try 0000