Setting the correct time on the clock

Hello Susan, thank you for your post!

I understand that you need help setting the clock on your Frigidaire range. Could you provide me with your model number please? You should be able to locate the serial tag (which lists the model number) on the frame behind the bottom drawer. With this information I can better assist you. -Matt

I appreciate your inquiry, Stephanie Givan!

From what you are describing it sounds like a possible short with your breaker box or issue with your terminal block within your Frigidaire range. I would recommend reaching out to a professional technician for a proper diagnosis to be completed. The technician will have the correct tools to check for any electrical issues within the range to make sure the correct component is being replaced. This will help avoid any unnecessary part purchases. -Matt

Hello Fran Addington, thanks for your post!
I understand that you are having difficulty setting the time on your Frigidaire range. With some ranges once you press "Clock" the time is actually set using the keypad with the numbers. I would attempt to use the keypad. If that does not help correct the issue could you please provide me with your model number? Typically, you can locate the model number on the bottom panel behind the drawer. I look forward to assisting you further. -Matt

Hi Friend, this is Z. Thank you for your post!

Based on the symptoms you are describing, it appears your Frigidaire range is possibly experiencing a potential wiring failure or a communication problem with the EOC (Electronic Oven Control). Try unplugging your range or flipping the household circuit breaker off first. It is good to wait approximately ten minutes and then turn on your range. If the issue continues, then I recommend contacting a professional to make a precise diagnosis.

Good Morning Friend,

I understand that you are having trouble with the left front burner on your Frigidaire range, model# FEF355. I see that the burner heats up to a glowing red hot temperature, no matter what you set the dial to. I suggest resetting your appliance, by either unplugging it or shutting the power off at your homes circuit breaker, for 3-5 minutes.

When power is restored, the first thing you will need to do is set the clock. You will do this by pressing the "Clock" button, then within 5 seconds press and hold the up or down arrows until the correct time of day appears.

Once you have set the time, turn on the left front burner, on the lowest setting. If the burner is still glowing red hot, I suggest contacting your local authorized technician for further assistance. They will be able to diagnose your range and determine what is causing the burner to glow red hot on all settings. Hope this is helpful.

-Best Regards-
WP

Hello jenniferp702 - Try resetting the unit by either unplugging it or flipping the household circuit breaker off. Wait approximately two minutes and turn on the range. Attempt setting the clock, if it is ineffective then I would suggest contacting a professional to move forward accurately. The range may possibly have a faulty wiring or a communication issue with the EOC.

Press clock button, then press temperature up button. Time will begin to change. When you have the correct time set, press the clock button again to save.

although you cannot see damage / the when the buttons do not respond. its possible that membrain is damaged or the eoc ( clock ) is not able to receive signals from the touch pad .. the clock will have to be replaced . list price for clock is 171.00 and includes membrain ( touchpad) .. hope this will help mm

F3 The oven temperature sensor is open Check for open wire connection between EOC (Electronic Oven Control - Clock) and the oven temperature sensor. Replace sensor if no wiring problem. F3 Oven temperature sensor open Check oven temperature sensor, 1100 ohms F3 Oven temperature sensor open Replace oven temperature sensor F3 Oven temperature sensor is open (above 3000 ohms) Check resistance of oven temperature sensor, check for open wiring between oven temperature sensor and control

yes the part number that you need to order is 316251903