<!-- from fixya rte -->Why does the display keep showing canon - Canon MX300 Office All-In-One Printer

hi

find link for tech support

https://ij.manual.canon/ij/webmanual/Manual/All/TS3100%20series/EN/UG/ug_in_02_c.html

Ansewer
#

Enter the Service mode following the procedure below.

1) Turn off the printer.

2) Turn on the printer while holding down the [Paper Source] button and [Information] button.

* Keep pressing the above buttons until "Initializing" appears on the display.

3) "S" is displayed in the upper right corner of the display showing the version.
4) After display of "Online", pressing the [Menu] button displays the SERVICE MODE top menu and the MESSAGE LED flashes.

Error 5100 show your ink absorver almost full. So reset your printer by using the following methods. * Keep your printer off. * Now press stop/reset button and press power button with holding stop/reset button. * After your power is display a light release stop/reset button but still pressing power button. * Press Stop/reset button two times by holding power button. * Now release both button. * Wait for few minutes until your printer display "0" on your printer LCD. * Now download Canon MP258 reseter ServiceTool_V1050. After

hi my printer canon mf 4412 printer is not working it is showing error batten red light showing , display is not showing pls solve problem pls it is urgent

cant send a fax but keeps saying check printer 5100?

Go to http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

I can help you fix the BUSY Error or Error 99 of your Canon EOS Rebel XS / Canon EOS 1000D.

Installation of this Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update will solve these problems:

1. Some cameras may exhibit a phenomenon in which the LCD monitor does not display, the shutter does not release, and the BUSY indication remains lit in the viewfinder.
2. The message, "Err 99 Shooting is not possible. Turn the power switch to<OFF> and <ON> again or re-install the battery", appears on the camera's LCD monitor, and after the above operation is carried out,the LCD monitor displays in a language that is different from the actual language setting.

See the firmware instructions and download the firmware upgrade by following these Fixya Tips :

1. Follow this link to download a pdf version of the firmware installation instruction guide.
2. Follow this link to download the Windows Version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
3. Follow this link to download the MAC version of the Canon EOS Rebel XS / Canon EOS 1000D firmware version 1.06 update.
4. Follow this link to download the Canon EOS Rebel XS / Canon EOS 1000D Instruction Manual.

I hope that helps.

Hi there you can only try it may work for you.

Canon MP170 (Ink Tank Full Error):

1 - power off.
2 - hold stop/reset ,hold ON/OFF
3 - release stop/reset, push stop/reset twice, quickly, then release ON/OFF
4 - wait untill LCD display shows "Canon Idle",then push stop/reset four times, quickly
5 - then push power twice, quickly
6 - power off and power on.

how can i reset canon pixma mp 110 tahnk you please help me

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500