Delta & Single Handle Shower Faucet  Logo

Related Topics:

A
Anonymous Posted on Oct 03, 2014

My new delta shower faucet doesn't turn off when you turn the handle. What might be wrong?

5 Related Answers

Anonymous

  • 68 Answers
  • Posted on Dec 31, 2008

SOURCE: I have a Delta Series

hi roger,

Sorry Delta 1300 and 1400 series valves do not have a volume control. Kinda odd but that is how they are made.

Please rate this response and Good Luck, Phil

Ad

Anonymous

  • 4 Answers
  • Posted on Mar 03, 2009

SOURCE: I installed Delta shower faucet 132900 and I could

Did you solder the valve in? If so you may have got it to hot. Or debris could have gotten in the valve. Turn the water off, remove the handle and cartridge. Check cartridge for damage or debris

Donni Steen

  • 687 Answers
  • Posted on Apr 10, 2009

SOURCE: replace delta single handle shower cylinder

Yes, I believe this unit uses a cartridge right? They do fit a little tight due to the small washers on the back side of the cartridge. If this is the one I'm thinking of, there are two leg like appendenges that come off the back and fit into small holes at the back of the manifold or what some call mixing valve housing.

Anonymous

  • 334 Answers
  • Posted on Oct 03, 2009

SOURCE: repairing a delta single shower faucet. The handle

There is a nut that needs to be removed, allowing you to remove the ball assembly.

Look at the ring nut right below the #1 in this pic.
Your's should be similar to this one.
9936d1215385468-how-remove-single-valve-handle-delta-shower-untitled.jpg

Anonymous

  • 155 Answers
  • Posted on Mar 31, 2010

SOURCE: Need to fix a leaking delta shower faucet and need

find the set screw on the handle loosen and remove handle, remove locking ring (a tool to do this comes with the replacement kit that you can buy from hardware store) remove the ball. You now have access to the washers and springs remove old washers and springs install new. reassemble in reverse. make sure not to overtighten locking ring.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Delta handle won't turn more than half way

Take the handle off and adjust the hot temperature stop. Its just a plastic piece that needs to be adjusted up more. It just fits in grooves like a gear. Its easy to do.
0helpful
1answer

I have two vanities and a shower in the bathroom. We only get hot water to the sinks when we turn on the shower to hot. Even if we turn off the shower we will still get hot water for a while. It just seems...

Check the water supply lines to the shower at the faucet handles. If the fitting for the hot water line connected to the handle is loose, it can twist and kink off the water supply further down the line when you turn the faucet handle. I'm not exactly sure how this could be relevant otherwise, but under normal design circumstances this type of scenario with your shower wouldn't matter for other faucets.
0helpful
1answer

How do I turn the shower on? I just moved into a place that has a Delta series 1400 Monitor shower handle, a smooth faucet, and NO mechanism whatsoever that I can see for switching from bath to shower. Is...

There should be a dirverter on the tub spout. It will be either a knob to pull up or a ring to pull down on and hold untill the water comes out the shower head.

If there is no dirverter go buy a new tub spout with one.. The prior owners may have installed the wrong spout.
0helpful
1answer

I just installed abrand new single handle delta shower faucet and the water does not get hot enough.

Many single-handle shower mixers have a hot limit, usually limiting the throw of the handle. You could go to the mfg's website (www.deltafaucet.com) & find instructions for adjusting it. Or, if you're handy, you could take off the handle & have a look; it shouldn't be too hard to see what's stopping the handle from turning more towards the hot side. Make changes in small increments & remember where you started.
0helpful
1answer

Single handle shower/bath faucet is dripping. Want

I can fix this.
What is the last thing you did before this problem started?
0helpful
1answer

Delta single lever faucet leakingafter bing shut off.

Will need to get delta faucet rebuild kit. Available at home depot, lowes or hardware store. It consists of valve stem seals & springs. The larger kit will contain ball assembly. Turn off water to faucet. Unscrew handle via set screw under plastic cap. Unthread cap over ball assembly. Pry out valve seals & springs. Reverse procedure to install.
0helpful
1answer

Delta shower faucet with a single handle lose

You need a faucet handle puller, you can get these at most home center and hardware/plumbing stores.
Once you get the handle and cover off you might just find that the control was never fully mounted.
2helpful
1answer

We have a very old Delta & Single Handle Shower Faucet. The screw in the handle is now stripped since it was so rusted. How can we get the plastic knob off???

you can try drilling a small pilot hole and then use an "easy out" (get'em at any hardware store). or take some large pliers and break the plastic handle and remove the whole cartridge. Go get a new cartridge and handle. Make sure main water valve is shut-off prior do doing so though.
0helpful
1answer

I installed Delta shower faucet 132900 and I could not shut the water. What did I do wrong?

Did you solder the valve in? If so you may have got it to hot. Or debris could have gotten in the valve. Turn the water off, remove the handle and cartridge. Check cartridge for damage or debris
Not finding what you are looking for?

279 views

Ask a Question

Usually answered in minutes!

Top Delta Home Experts

john h

Level 3 Expert

29494 Answers

Paul Carew

Level 3 Expert

3808 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Delta Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...