How do i fix paper jam without really a paper?

here is nothing wrong in saying, "paper jam issue in canon printer " one of the most irritating issue.
especially when you are going to print any import document and it got stuck in the middle of printing.
when we face paper jam issue with our printer. we always try to contact to a technical expert for fixing such kind issue. while most of us don't know, you can fix paper jam issue in canon printer by yourself without inviting any technical person at your home.

For More details check this
how to fix paper jam issue in canon printer by myself Fixotip

What model printer is this? Does it jam in the rear every time, or do some papers get through?

I can't really give you any specifics on how to avoid the jam without knowing what brand and model of printer you're using, but as soon as you get me that information, I will find you a solution.

see if this link helps you out.. embassy elite paper shredder and it is jammed really bad Google Search

How to take out paper jam

The micro-switch that detects a paper-jam is still detecting a paper-jam.
Either there is paper-dust in the switch, causing the "false-positive" indication,
or the micro-switch is broken, or there really is a paper-jam that you have not detected.

Check the micro-switch, and look again for a paper-jam.

Try this fix. It is shown on a similar model Epson workforce 630. Best of luck to you!
Paper jam in printer:

Paper jam in Automatic Document feeder or ADF:

There may still be a small sliver of paper somewhere along the paper path. It only takes one small piece to interfere with the mechanism that detects jams and causes the copier to stop working. Since the copier gives you an indication of where the jam is occurring, I would focus my attention in that area, removing trays, using a small flashlight to get a really good look inside.

On the back of the printer is a access cover. You should be able to remove the jam from there quite easilly.

Hello sir; Go back to wherever you pull out the paper, because you pull the paper in opposite direction therefor pull off the senser,go back where the paper jam put the senser back in right position.

Check the requirements for paper..that is usually the problem if it right out of the box. If you look on the side of a **** of paper you will see "20 pound" or "30 pound". The 30 pound is the stiffer paper and easier for printers to pass thru. Of course it cost more too..if paper change does not do it or if you are using correct paper, then I feel since you just bought it you should bring it back. There is really no "fix" for paper jams on a new printer, ie. worn down rollers. Hope this helps.
Pls rate this solution.