I have a ikonvert Sc-56 that was purchased the first of the year 2014 and just up and quit working about 1 month ago. Tried to replace it at the place I bought it, but they said they would only replace one of the same and they no longer carry this model. Would like to contact the manufacturer, but cannot find any info on them. Any help for this one?
SOURCE: Model JVM1870SK04 Spacemaker XL1870
We see (and repair) this a lot. The problem is on the control panel, which
we regularly repair nationwide by mail for $39.95 postpaid.
This light failure often occurs when a bulb goes out and the filament
shorts, or when the bulbs are removed or installed without first
unplugging the oven from the power line. Either can cause such a
failure on the controller.
This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.
Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa.
Feel free to contact me directly.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
William E. Miller
[email protected]
http://www.microwavedisplay.com
SOURCE: Evaporator Coil
Yes, just count how many pins per inch and replace with the same number of pins per inch.
SOURCE: GE COFFEE MAKER 169123
Here is a link to the GE parts page:
http://www.gehousewares.com/Customer_Assistance.aspx
-Tha Mp3 Doctor
SOURCE: We bought the Jacuzzi Perfecta toilet 1 year ago
The complication here is that Jacuzzi does not make toilets anymore than Sears makes refrigerators. In Sear's case their Kenmore refrigerators are from Whirlpool with the Kenmore name.
It is my understanding that Eljer was the manufacturer of the toilets with the Jacuzzi name typically sold at box stores. With that as a starting point, surf the web for any Eljer toilet tank replacement parts and see if you can find a similiar flusher
SOURCE: Iron quit working in less than 1 year.
Bought my Shark G1400Z iron about a year ago. The iron caught on fire. Luckly I was only out of the room for a few seconds. What can be done about this?
118 views
Usually answered in minutes!
This appears to be something to do with a television, and as such is not a camcorder.
×