Get repair parts for my Lanier vw-210

Press the telephone button first with one finger and immediately after you press that button press the rewind button, The unit should go into rewind and erase should be flashing on the digital display. When the unit starts rewinding take your finger off of both buttons, if you keep them on ,then the unit will rewind and stop erasing .

This unit most likely has a broken rewind/fast forward rubber belt. This is a very common problem and is easily fixed if you can acquire a new belt. Any place that services Lanier equipment should be able to easily fix this problem.

Hello http://www.tvps.com/Products/Lanier-VW-260-Manual---Micro-Cassette-Transcriber__ECS-MANLAVW260.aspx

Hello the Display work like this insert the tape on the Lanier VW260 with the unit on rewind the tape to the end when you press play the Display start to count

There is a sensor that detects tape movement. Unfortunately they do go bad and will probably need to be replaced.

It is not a problem at all! The VW-210 & 260 was designed to utilize a two-step erase procedure to prevent accidential erasing of tapes.
1.) Press & HOLD down the TEL button
2.) Immediately press & HOLD down Rewind button UNTIL erase function starts then quickly release both buttons.

Should be a tape speed switch on that unit under the door.

Most likley it is a bad motor or a broken belt. There is a seperate motor or FF and Rewind.. If the motor is bad it is likly that the motor control circuit board is bad also (motor shorts and takes out the board also). If there is no "click" when play is selected it could be the play solenoid is dirty and not engaging. I have repaired thousand of these units through the years and in spite of these issues they were a great sounding unit.

BTW this is true for the VW-210, VW-260, p-139 and simular units.

yes I have two lanier voice recorders one left hand and one right hand one power supply real cheap do not use them any more . listed on ebay as lanier vw-110 standard cassette dictator. If you still need them. Thank you John

The foot pedal is a 7 pin connector and you have 3 different foot pedals options the Models are LX-055-5,LX-055-7,ECS-055-7
New at http://www.tvps.com/Products/Lanier-LX-055-5-Transcription-Foot-Pedal-with-7-Pin-Plug---New--LX055-5__LA-LX-055-5.aspx
Pre-Owned at http://www.tvps.com/Products/Lanier-LX-055-5-Transcription-Foot-Pedal---Pre-Owned__LA-P-LX-055-5.aspx
ECS-055-5 at http://www.tvps.com/Products/ECS-ECS-055-7-Lanier-Compatible-Foot-Pedal---New__ECS-055-7.aspx
New http://www.tvps.com/Products/Lanier-LX-055-7-(940-3015)-7-pin-Transcription-Foot-Pedal---New-LX0557__LA-LX-055-7.aspx

all those Models are 100% compatibles for the user manual go to www.TVPS.com type in the search box ECS-MANLAVW210