Hi I have te 2000 cash register and I am trying to change bottom mesaage but I cant change could any one please explain me thanks

Here is a link to the user mnanual, the ingo is in the manuayal. http://support.casio.com/storage/en/manual/pdf/EN/006/TE-2000_EN.pdf

0132-sub - name-cash

Hi. Error 12 means you have run out of journal paper. replace the journal roll. The language can only be changed when the machine is fully cleared back to factory specs, then you must re-program it. It would be best to take it to a dealer if you are not confident. -----------------------------------------------------------------------
If anyone needs a Casio TE-2000 manual, http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
Looking for a manual for a Casio TE-2200, TE-2400 cash register? Go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
If anyone needs a manual for a Casio TE-2400 cash register, go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Hi. Try this:
Turn key to program mode 2 SUBTOTAL 1232 SUBTOTAL Now type the characters for the first bottom line of the receipt using the alphabet on the front of your department (item) buttons 00 (double zero button) CASH (maybe labelled CA/AT) 1332 SUBTOTAL Now type characters for second line 00 CASH 1432 SUBTOTAL Now type characters for third line 00 CASH 1532 SUBTOTAL Now type characters for fourth line 00 CASH SUBTOTAL
If you don't see the message change after 2 receipt prints in REG mode, then you have the commercial message and you'll need other codes. Just let me know. ---------------------------------------------------------------- Looking for a Casio TE-2000 manual? There is one here:
http://the-checkout-tech.com/manuals2/cashregisters/Casio3.php

I don't know too much about Cash Registers specifically. But do you have the guide? Look up if possibly there could be a specific button you have to press to "accept" changes.

Yes, u need to do it in PGM3 to change price for scanning PLU. The PGM1 is for Normal PLU price change.

Of course , u can use Casio CV-10 software to do the price change too.

Hi.
Try this:
Turn key to program.
3 SUBTOTAL
2122 SUBTOTAL
10000000 CASH
SUBTOTAL

That should turn off the bitmap logo. Now just program your own logo using character input.

Mark

Hi. I don't have any downloads, but I know this model, so I can help with programming.

Mark