All colors seem to be working fine except the black when printing a whole page it prints about 1/2 inch and then skips a 1/2 inch, repeats this down the whole page
Take out cartridge put in a sandwich baggie and shake it; then re-install
SOURCE: Full ink cartriges print a few lines and skip a few lines
well..did you run a test page?
or clean the print heads?
or recalibrate them?
recommend all these steps for you
and as my 2200th solution, you are entitled to a FREE tuneup for good. find out more about that service here
SOURCE: Black print is skipping
Hi,
Did you try runing a nozzel check?Please try out once and let me know.
goto to start-> settings->printers and faxes-> select your
printer->right click->properties->tools-> find options like
clean cart or nozals.
check printer settings for best ,normal,or draft set as best and try. may helpful.
Goodluck,
Please don't forget to rate the solution.
SOURCE: changed black ink cartridge to LD brand. Now
Canon printers do not like non Canon inks. Maybe other printers have similar issues but it seems that Canon is particularly finnicky.
SOURCE: Black ink not printing. Will print a page fine
Seems like Black cartridge is either empty or clogged. If you are sure that cartridge got ink in it then remove it and soak (surface only) of the head into hot water for about 15 seconds and test it by rubbing the head onto a cloth. If no ink comes out then try again.
good luck
please vote so I can continue sharing
1,109 views
Usually answered in minutes!
×