My Bravia suddenly lost color, I I see only vague white shadows, audio is fine.

Hi,
A faulty Tcon board is often found responsible for wrong colour type faults. Some times the main board is also found faulty. If it has happened all of a sudden, it is not aging.

Image burn from leaving it on.. Its the vertical colors we get when we disconnect everything.. Its stand by screen.. It won't get worse.. But u either have to replace it.. Or live with it..

If you are using the component video hookup which is 3 wire. green, Blue ,Red and red and white audio. be sure that all 3 of the video wires are pushed in all the way. check both ends. Replace cable. if all 3 are not connected then color will be be goofy. Let me know if this doe not help.

Buy an audio cable: stereo jack male at one side and RCA Audio on the other end. Connect the male jack to the laptop's headphones and the RCA channels to the audio inputs at the back (you will see the two channels - white and red colored ones).

Are you absolutely sure you have it wired up right? Are the Cable RIGHT wires color to color, is the "Correct Input" selected? Remember you do NOT use "Channels" but an AV, AUX, or External.input. Most DVD etc, use AV, IE: Yellow, (Video), Red, (Audio), White (Audio) for the OUT connections. These go color to color at TV end. And uses 3 Cables. The "Other" type of Output/Input is Component Video. This is ALL Video, Red, Blue, Green, these go color to color as well. BUT you MUST also send the Sound, Via the AV, IE: The Red & White, AV, Audio IN/OUT connections, So you in this case would have 5 cables/connections in all.

Reset the colors setting back to factory original setting.Should have all colors back to original.Not than ur main tuner signal board is dead,must replaced.

The Nintendo 64 sends out a signal that can only be properly decoded by old CRT TV's

Those Bravia TV's are the God's TV's even if they did work on it I wouldn't recommend it because it would most definitely eventually ruin the life span of your TV.

But to answer your Question the Cables should be plugged into AV1 which is the Red White and Yellow Connections

I bought Sony Color Bravia TV 60 inch, moved with it Kenya, Africa, when i try to tune the color is not coming. I can only get black and white. Please anybody with idea on how to change it for Africa (Kenya). Model:KDL-52SS100. My e-mail. [email protected]

I did the following and it has stopped printing "shadows". I don't know if it was one solution or the other (or both) that worked.

1.On the face of the printer press the "Menu" button>Admin Menu>Maintrnance>Color Reg Adj>
Auto Correct>Yes
2. "Menu" button>Admin Menu>Maintrnance>Clean Developer>(Pick problem color)>Yes.

Hope it helps

did u try cleaning the video head? heres how! unplugged the unit. open the cover. get a piece of clean white paper. put a little alcohol on it. place your finger on the paper and slowly touch the head but not too much force then gadually move the drum back and forth. donot move your finger up or down. just clean it horizontally by slowly moving the drum leaving your finger stationary. let it dry and test. if the problem persist see a doctor(technician), u have a problem with the color circuits. good luck!