Question about Linkdelight SATLINK WS6903 Digital Satellite Meter Finder LED Displayer TV

Open Question

How do I use satlink ws-6903 satellite finder

How do use this device after connecting to set top box and satellite dish

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you connect satellite dish directly in a panasonic tx -42d235l


Probably not... the box is programmed to what ever company you are using and if you can then you will need to contact your service provider and set the tv up like the box....

Dec 02, 2014 | Panasonic Televison & Video

1 Answer

Codes for dish satellite rcr313br


If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Nov 11, 2013 | Audiovox Televison & Video

1 Answer

Can't get closed captioning to work on westinghouse 46" 4680 led tv


What is the video source? Some set-top boxes send a closed caption signal that doesn't match the TV's CC interpreter. For those devices, you need to enable the captions on the set-top box.

I know how to enable captions on one particular Dish satellite box. The steps will depend on if your TV is TV1 or TV2 connected to the box. If the TV is TV2, you need to set the box in Single mode (so both TVs are set to the same channel). This is done with the Mode button on the box itself (highlight Yes and click Select using the Dish remote when prompted to go to Single Mode). If the box is in Single Mode, you won't get a prompt but the unit will go to Dual mode. There is a small LED on the box to indicate Single or Dual mode.

Next press Menu on the remote and go to Properties (9). Click Select and then navigate to Closed Captions (6). Click Select. Go to the Closed Caption On/Off line (1) and press the left arrow and then the up/down arrow to set to the captions to On. Press the right arrow and then Select with Done highlighted. Exit the Menu by hitting Cancel repeatedly.

I hope this helps.

Cindy Wells

Jul 24, 2012 | Westinghouse Televison & Video

1 Answer

How to turn off subtitles on a hitachi tv


This may depend on the signal source of the TV. If you are watching OTA TV (or your TV is interpreting the CC from the cable or satellite signal), then use the CC button on the remote. Alternatively, depending on your exact model Hitachi TV, try using the menu to find a Tools or Options sub-menu and then turn off the CC from there. This could be under a different menu item. If you add a comment with your model number, I'll be glad to give the exact menu steps.

If you have a set-top box (cable, satellite, digital-to-analog converter box, DVD recorder), the captions may be turned on at this source. Then you will need to disable the captions from that box. With a converter box, press the CC button on the converter's remote or enter the menus for that box.

With a Dish TV set-top box, press Menu on the Dish remote, go to Properties (item 9). Click Select and then go down to Closed Caption (item 6), and press Select again. The first item in this sub-menu lets you turn on and off the captions. Press the left button and then up or down arrow followed by Select to change the setting. For other sources, check the instructions for that device or add a comment with the specific source for a solution for that device.

I hope this helps.

Cindy Wells
(the Dish CC procedure is for the box I have to deal with; I can't guarantee that updates/model changes have not changed the procedure.)

Jul 15, 2012 | Televison & Video

1 Answer

Can i hook up an old tube type tv to a new high satellite dish? i dont care if i get high def picture just want a regular picture.


Yes there is an option for ouptuting 480i signal from most hd receivers. You will need to check the specifics for the satellite dish receiver as to the channel that the TV should be on as well as how to set it to the resolution that you need. (I know some Dish receivers need channel 60 for the SD TV (coax (RF) connection) when it is TV 2 but channel 3 or 4 for TV 1.) Also check your TV so that you can use the best possible input available.

However, you may not be able to read the closed captions unless you enable them on the receiver. (Apparently, the encoding has changed.)

The manuals for some satellite company receivers are on their website. For example, Dish network manuals are here: http://www.dishnetwork.com/supportsection/manuals . Their manual for the Solo VIP 211k describes connecting the receiver to a SD TV on page 91 (page 97 in the PDF version).

I hope this helps.

Cindy Wells
(I'm not aware of any satellite system that doesn't use a set-top box. If you do not have a receiver, then the above does not apply and you may not be able to get a signal.)

Apr 13, 2011 | Televison & Video

1 Answer

I am trying to connect an Insignia flat panel TV to my existing Dish satellite system. Dish satellite system is not HDMI. We have: cable from the wall (satellite) connected directly to the new TV (exactly...


Hi,

I really need to know the model number of your Insignia TV and which connections you are using between the Dish box and the TV to give you the correct answer. If you are connecting both cable and satellite, I believe it should be set-up as follows:

1. Connect cable feed to TV
2. Run auto channel scan on "cable" setting
3. Connect Dish box to TV and then try changing the "input" selection.

With the Dish box switched on to a channel number you know, try pressing the "INPUT" or "SOURCE" button on your Insignia TV remote repeatedly until you find the satellite feed. Once you have done so, you should be able to change satellite channels using the Dish remote.

If you need further assistance, please post back with the model number of your TV and details of the connections you are using on the back of the TV.

Regards,
BElectric

Dec 29, 2010 | Televison & Video

4 Answers

Trying to find out what my tvs settings should be on to hook up m


Have you tried channel 3 or the video input channels.
The Tv only needs the one channel that the signal from the box is sent on.
All the viewing channels will be changed through the satellite box.

May 11, 2009 | LG Televison & Video

1 Answer

Reception upgrade or what ?


Older sets are fitted with analogue tuners which can't handle digital signals. The only way round the problem is if the TV can be used as a monitor via a scart input. The external freesat or digital set top box contain digital tuners which can then display the required digital information on the TV. These external units have scart output sockets at the back, specifically for this purpose. So it's a scart lead from your external digital device to the scart input socket at the back of the TV. The remote control for your external box is then used to select the required programmes

Oct 24, 2008 | Panasonic Televison & Video

1 Answer

Combining output from dish home distribution with ota antenna


You should have your system setup in the following manner below:

You also will only be able to receive the HD locals with a HD OTA antenna. It is possible that you will need to turn the satellite off in this room to view the OTA's effectively.

Also you should use a splitter as depicted in the picture by the red boxes to combine signals of this frequency. The blue box is the diplexer on the incoming satellite feed and the black box is the seperator that most dual tuners use. If yours does not utilize this device you will have another cable coming from the outside of the house to the back of the receiver. The location of the ports on the back of the receiver in my diagram may differ in position on your receiver so obviously connect them to the proper port. I hope this ressolves the issue and there is no need to seperaate the signal at the remote tv as it will only be a duplicate of the same signal you have connected already as OTA and the TV2 backfeed are of the same frequency range.


296c440.png

Sep 18, 2008 | DISH Network Televison & Video

Not finding what you are looking for?
Linkdelight SATLINK WS6903 Digital Satellite Meter Finder LED Displayer TV Logo

Related Topics:

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linkdelight Photography Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Brad Brown

Level 3 Expert

18031 Answers

Marvin
Marvin

Level 3 Expert

84565 Answers

Are you a Linkdelight Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...