SHARP MODEL 27N-S100

0387,0389,0328,0399 are the codes to check with Goldstar. If you wish to get more, check these links. http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

You have a direct short in the power supply or the high voltage stage, without more data it is hard to be more precise. But let us speculate, if the fuse blows right away, "power supply issues" If the fuse takes several seconds it is more than likely, " flyback problems "

If this line does not go all the way across the screen then I will bet you this is an easy fix. Press the menu button on the remote control. The menu will hopefully show up over-top the black. Search your menu for the closed caption setting (usually under audio settings menu) and turn closed caption OFF. Hopefully this fixes your issue. Cheers.

Yes, you need the converter box because it does not have a digital tuner

No it does not have the digital tuner. You can you it if you have a cable or Sat reciever. If you wish to use an antenna then you will need a digital converter box

just replace your speaker or resolder the audio amplifier,to check ur speaker you must full the wire and connect it to a 1.5v battery hear the sound if theres asound ur speaker is ok maybe the audio amplifier is the problem

On the front of the TV you should be able to press both channel up and down at the same time and it will give you access to the TV menu. Once in the menu use the channel and volume up and down buttons to navigate.

Good luck....

Focus adjust is located on the neck board or on the Flyback transformer, another fault is dirty spark gap inside the CRT socket

turn off cc/closed caption

changing the eeprom ic should solve your problem.