Question about Mitsubishi WS-55819 55" Rear Projection Television

Open Question

How do I fix Dark edges on Mitsubishi 55" projection tv?

The tv has dark edges when picture is on

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 80 Answers

SOURCE: Dark picture problem

did you change the lamp with an original or bulb only - mitsubishi only sells the lamp and housing!!!
never use generic

Posted on Oct 16, 2008

Ad
  • 1 Answer

SOURCE: picture getting dark on my 70" mitsubishi projection

I FINALLY got the problem fixed!!! Gee I feel stupid. I called a great local TV repair guy and he came out and fixed it for next to nothing. The stupid part is that all he had to do was take apart the TV's front fascia and clean the mirrors and things inside....it was FILTHY!!! Then the TV was like new again. It looks so good I wanted to kiss him. He advised that you really should be cleaning that about once a year or so to prevent this problem. Also, I live in Nevada with HIGH dust so that doesn't help either.

Posted on Dec 05, 2008

  • 159 Answers

SOURCE: Color

If the tv looks now dark this is the first symptom of a lamp replacement (refer to the user's manual to do this job) and get a Mitsubishi original replacement.
the best picture setting (when the lamp is back of course) depends in the light of the room.
Now if after replacing de lamp and playing with the settings and the screen still pale, dimm, not enought color. a cleanning in the reflexion area is needed. (technican job)

Posted on Apr 17, 2009

  • 11 Answers

SOURCE: Dark picture problem

there are 2 mirrors did you clean both there is one down in front near the light source when front screen removed lean in and look down there is another smaller mirrorclean it

Posted on Jul 07, 2009

  • 597 Answers

SOURCE: Hi: I have a Mitsubishi WD 52527 projection TV.

go to menu...correct brightness

Posted on May 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sound no picture


inverter board issue.

Feb 22, 2017 | LG Televison & Video

1 Answer

KDF-E50A10 - hard to see details during dark scenes and a dark bluish tint can be seen in background. When tv is turned off the screen goes black but has bluish tint toward the edges before it all goes...


Hate to tell you this but it sounds like your picture module is going bad. The bluish tint tells me it is leaking to the outside. Some problems with the LCD picture module can be fixed but I never had to fix one. Might check out some videos on repairing LCD picture tubes on YouTube.
Gillight

Dec 03, 2013 | Sony KDF-E50A10 50 in. LCD HDTV

1 Answer

Picture brightens then darkens


Trying with a DVD will rule the tuners in the set in or out and also suggest a setting in the set or a box if used is causing this issue.

Nov 03, 2012 | Samsung LN32C350 32 in. TV

1 Answer

Dark Band on Samsung projection TV


most likely optical engine issue----bad light engine.

Aug 27, 2012 | Samsung BP96-01073A E-Series Replacement...

1 Answer

Brand new 47" "Edge Lit" LED, model MV4(Cant


I believe there may be another setting, it has to do with auto contrast which can make the TV seems to have high contrast ratio but sometime it does not work right, espically on the scene with dark sky with stars, someitme it will will reduce the brightness to make black real black and you can loger see the stars in the scene. I forget the name of this setting, it may be in the user manual. Do you see that in TV HD mode in other movies with a lot of dark scenes?

Dec 01, 2010 | Televison & Video

1 Answer

Ihave a Philips 50PL9126D tv and I just replaced the lamp because the picture was very dark. I can see the picture but it is still somewhat dark, bright in the middle,dark at the edges. I tried to adjust...


Sounds like you may have the wrong lamp. Make sure you purchased a Philips lamp that's 100% compatible with your television model. Philips pioneered that lamp, so naturally they make 100 different types for DLPs and LCD projections.

You may have an elliptical lamp instead of parabolic. The lamp for your TV should read P22h.

Feb 04, 2010 | Philips Televison & Video

1 Answer

Blackening around edges of Philips 55PL 55" LCD


Check any magnet or some speaker are near ur tv . Off it for 1 hrs , re on it & check

Dec 23, 2017 | Philips 55PL9523 55 in. LCD Television

1 Answer

Dark black spots around the edges of LCD TV


this issue is tape from the edge of the panel falling onto the screen.You will have to remove the cabinet and the panel from the bezel(front cabinet).remove the screws from the lcd outer edge. Take of the tape.Be very carfull of the ribbon cable that goes to the lcd controller and to the lcd screen itself. They break easy. If you do , its over. you will need a new panel. to much money and work. best to leave it alone.I have fixed it several times for people with warrentys. It is just anoying but will not hurt your tv.

Aug 28, 2008 | Memorex MLT3221 32 in. LCD TV

1 Answer

Dark edge of screen


there is a part inside the engine(the part that produces the picture) that is a mirror tunnel. The actual part name is "light tunnel" this tunnel takes the light from the bulb and compresses it into a smaller beam of light that is then shined onto the DMD(million mirrors) this produces the picture on a DLP TV. this mirror tunnel is glued together on all edges. One edge of your "light tunnel" has started to come unglued and has slipped a little. This causes the slightly dark area usually on the left side of the picture that you see. the light tunnel can be replaced as a single part. much cheaper than replacing the whole engine.

Jun 19, 2008 | Samsung DLP HL-P5663W 56" TV

1 Answer

Edge Enhancement Option Disabled...


edge enhancement option i think would be enabled if you are in dynamic or movie mode. What it does is to enhance the contrast of the edges of 2 different colors.

I have the LA32S8, similar specs but only 7000:1 CONTRAST ratio. when playing dvd, i set it to movie mode. Settings vary on different tv and player. you can adjust first the backlight, then brightness then contrast, color and sharpness. the brightness you adjust by choosing the level that shows enough details on dark scenes. adjust if its too dark not to see the details of the scene. contrast, you can set by distiguishing vivid colors of the picture, dont put too much contrast as your picture would look flat. it should have a 3d look, same also with sharpness, you can experiment on the face of a person to show details on the edges.
color you set just enough to make it accurate on color reproduction.

My settings for movie are
contrast 92
brightness 49
sharpness 23
color 57
tint g48 r52
backlight 7
tone warm1
digital NR off
black adjust high
dynamic ocntrast high
gamma +2
edge enhancement on
color space auto

Oct 05, 2007 | Samsung LN-S3241D 32 in.LCD HDTV

Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76125 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...