General electric model number 2 9290a

probably a faulty transformer inside. If you remove the transformer you should find a model number. If this is replaced, you should be OK. Google the power unit model number to find which other printer models use the same. Then go looking for one with a trashed printhead or similar faultn going cheap.

those things usually use a universal desktop-type computer cord that you can find anywhere: Radio Shack, Walmart, Target, Best Buy, etc...

check power cord for loose ends on some models there are fuses
open monitor look for dirty connections if so go to a radio shack and get a can of electrical cleaner if all fails you need a power supply they are cheap look up model number and search around

If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

There are 2 basoc cords one looks like a figure 8 the other looks like a 1.5 x 1/2 inch rectangle with 2 corners cut off used as a power cord for most computers.

DickyO

Cords are pretty generic in most cases---where have you looked and where (general) are you located? Google the model number of the set with "power cord"?

put a free ad on craigs list maybe that well help you.

The part number for this is: RCA #260519, but it is listed as no longer available. Your best bet is to call around to a few local repair shops looking for either a new old stock (NOS) one or a used one.

Dan

Take a look at the picture on this web link of the 3 power cords.
(scroll down just a little)

http://www.toastercentral.com/cords.htm

The pin spacing sizes are 1/2", 11/16", and 1 & 1/16ths inch.

Then you can go to this page:

http://electrical.hardwarestore.com/12-33-appliance-replacement-cords.aspx

scrolling down the same distance and look at the details of each cord.

Most large hardware stores have these cords if you know the Woods Industries number. Usually 0288, 0290, 0291, 0293 There are a few others but they are all in the same range from 0288 - 0293 (WOODS INDUSTRIES)

If you can not find it at a hardware any appliance parts center will also have them. Just remember the WOODS INDUSTRIES numbers.

Kelly

Call this number: 877-207-0923. You will be able to order the replacement part.

i appologize for thje delay in this response, i am unaware of any such model number, there generally is a hook up ( haard wiring ) under the righyt bottmo acess panel, if not a call to the manufacture would perhaps assist you further