I have mitone mitmp25 mp4 player When i connect it to pc, it shows 3 folders sls.dir playlist & mic.dir Where ould i copy mp4 files in thesefolders? I tried copying in every folder but the player doesnt play this file. in the menu section when i select video, i see olny 2 folders playlist & sls.dir but none contains this mp4 file reuqesting you to please help

Hello Elizabeth,

To transfer music to your player, connect your Coby MP600 to your computer using the supplied USB cable.

Once connected, your computer will automatically recognize the player as a Removable Disk.

??To open the player to view files, double-click the icon that appears.

Once you have opened the player's folder, simply drag and drop files to the player as you would a floppy disk.

??Copy music files to the root directory.

??Copy movie files to the "MOVIE.DIR" folder

??Copy photo files to the "PHOTO.DIR" folder

??Copy text files to the "TEXT.DIR" folder.

After copying the files, disconnect it properly and you are done.


I hope this helped you.

You can rate my answer if you appreciate my help.

Thanks!

To transfer songs to your Coby MP-610 please follow the instructions below;

1.Connect the Coby player to the computer with the USB 2.0 cable provided as shown.

2.Upon connection your computer will automatically recognize the player as a Removable Disk.
3.To open the player, double on the icon that appears.You can see all files and folders currently stored in the player.
4.Once you have opened the player's folder, simply drag and drop (or Copy Paste) the required files to the player from your computer to the following folders;

• Copy music files to the 'MUSIC' Folder
• Copy movie files to the 'MOVIE.DIR' Folder
• Copy photo files to the 'PHOTO.DIR' Folder
• Copy text files to the TEXT.DIR' Folder

Thanks for choosing Fixya.

Hi, player not recognized by the computer

This may be caused by one of the following:
1. Minimum system requirements were not met.
2. Corrupted drivers.
3. Computer restrictions.
4. Power issue.

To resolve this issue, try the following solutions:

SOLUTION 1 - For brand new player or first time connecting to this computer.

For Windows XP users: verify the following operating system requirements are met.
- Windows XP SP2 or higher
- Windows Media Player 10 or higher

Download and install the latest Windows Media Player if it's not installed.

For Windows Vista users: If the player is seen in My Computer when using MTP mode, but not showing in Windows Media Player.
- Download the hotfix from http://support.microsoft.com/kb/939211.
- Run the hotfix.

For MAC users, see Sansa player not recognized by a MAC OS

NOTE: If you are trying to connect to a Computer at work that is part of a network, there may be user right restrictions that are set to disable access to new hardware or stop any program installations. You may need to check with your IT administrator to see if this is causing the problem.



SOLUTION 2 - Refresh the driver

STEP 1 - Connect the Sansa player to the PC
The screen on your player should turn on, show 'Connected' and indicate the battery charging or full.
- If the player does not turn on try other USB ports or on another computer if one is readily available. Ensure you are connecting directly to the computer USB port and not to a USB hub.
- If there is nothing showing on the screen and the player does show up in as a storage device in an explorer window, then the screen is just not working.

If you receive the error "USB Device Not Recognized" on the computer, the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.


STEP 2 - Check under Device Manager
1. Right-click My Computer, and select Manage.
Image
2. Click Device Manager on the left pane.
Image

NOTE: Sansa MP3 Players can connect to your computer in MSC or MTP mode. Exceptions are mitone mp4 player Connect and mitone mp4 player Express which only use MTP mode. MTP mode is the recommended and default method for mitone mp4 player Players when used with Windows OS.

The mitone mp4 player player will show up on Device Manager's right pane as:
1. USB Mass Storage device (if the player is set to MSC)
2. Portable Device (if the player is set to MTP mode)

If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers.


STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action then select Scan for hardware changes.

NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.



SOLUTION 3 - Connect using MSC mode
Connecting in MSC mode will help determine if there is a problem with MTP mode or with the Auto Detect mode feature of the player. You can use Forced MSC mode or switch the player settings to MSC.


If the player is detected in MSC mode but not when set to MTP mode, try to update or reinstall the mitone mp4 player firmware

NOTE: mitone mp4 player Express and mitone mp4 player Connect do not have MSC mode. For mitone mp4 player Connect you can try reinstalling the firmware using the Connect Recovery Mode.

Additional troubleshooting notes:
If you have replaced the mitone mp4 player Player and you still have problems getting it to recognize in the computer, then you may need to try some additional troubleshooting.
- Try connecting on another computer.
- Try using a different USB cable
- Try connecting to the back USB ports which may supply better power.
- If only MTP mode is not working, try reinstalling Windows Media Player
For Windows XP try also download and install the MTP Porting Kit.

Hope that helped And please don't forget to rate me..

Have a nice day....

Hi, are you sure the computer is recognizing your player?...if not....

player not recognized by the computer

This may be caused by one of the following:
1. Minimum system requirements were not met.
2. Corrupted drivers.
3. Computer restrictions.
4. Power issue.

To resolve this issue, try the following solutions:

SOLUTION 1 - For brand new player or first time connecting to this computer.

For Windows XP users: verify the following operating system requirements are met.
- Windows XP SP2 or higher
- Windows Media Player 10 or higher

Download and install the latest Windows Media Player if it's not installed.

For Windows Vista users: If the player is seen in My Computer when using MTP mode, but not showing in Windows Media Player.
- Download the hotfix from http://support.microsoft.com/kb/939211.
- Run the hotfix.

For MAC users, see Sansa player not recognized by a MAC OS

NOTE: If you are trying to connect to a Computer at work that is part of a network, there may be user right restrictions that are set to disable access to new hardware or stop any program installations. You may need to check with your IT administrator to see if this is causing the problem.



SOLUTION 2 - Refresh the driver

STEP 1 - Connect the Sansa player to the PC
The screen on your player should turn on, show 'Connected' and indicate the battery charging or full.
- If the player does not turn on try other USB ports or on another computer if one is readily available. Ensure you are connecting directly to the computer USB port and not to a USB hub.
- If there is nothing showing on the screen and the player does show up in as a storage device in an explorer window, then the screen is just not working.

If you receive the error "USB Device Not Recognized" on the computer, the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.


STEP 2 - Check under Device Manager
1. Right-click My Computer, and select Manage.
Image
2. Click Device Manager on the left pane.
Image

NOTE: Sansa MP3 Players can connect to your computer in MSC or MTP mode. Exceptions are mitone mp4 player Connect and mitone mp4 player Express which only use MTP mode. MTP mode is the recommended and default method for mitone mp4 player Players when used with Windows OS.

The mitone mp4 player player will show up on Device Manager's right pane as:
1. USB Mass Storage device (if the player is set to MSC)
2. Portable Device (if the player is set to MTP mode)

If there is a yellow exclamation point (!) or question mark (?) beside the device, try to refresh the drivers.


STEP 3 - Refresh the drivers
1. Right-click the entry with the error mark, select Uninstall.
2. On the top menu, click Action then select Scan for hardware changes.

NOTE: If a device with yellow exclamation point (!) continually appears and disappears, then the player is most likely failed. Additional troubleshooting is unlikely to correct the problem.


Hope it helped ..

Have a nice day..

all tracks will be in their proper folder, but as far playlist (that is winamp playlist) rockbox will create a playlist unless you change it .....
here read 4.4 of rockbox http://download.rockbox.org/manual/rockbox-sansae200/rockbox-buildch4.html#x7-650004.4

MITONE MITMP22 4GB MEDIA PLAYER PLAYS RMVB FILES

TO CONVERT TO RMVB FILE USE WIN AVI (AVI TO RMVB)

ONCE YOU HAVE THE WIN AVI PROGRAMME THEN YOU WILL NEED THIS EXTENSION FILE (HelixSDK0715 win avi rm extention file) AND CHOOSE THE SIZE OF FILE TO SUIT YOUR SELF IN ADVANCED ONCE YOU HAVE SELECTED RM

Here is the link to the Mitone company.http://www.szimp3.com

Dr. Fawaz
gm@tekvalorg

If a player like this http://www.szimp3.com/product_show.asp?BigClassName=MP4&SmallClassName=MP2610 , there are several clones of the Chinese goods. Firmware on the Russian here (English supports) http://ftp.roverbook.com/RoverMedia/Aria_Q7  there two different versions of firmware for the assembly player (one can work with bugs)

Methodology firmware:
1. Disable USB cable, turn off player.
2. Holding down "M" connect the USB cable.
3. The menu select 3 - y para (other then USB disk), clicking the right analog stick.
4. The system will appear logical disk 2. First at 16 mb, second - remaining FLASH memory.
5. Copy invested in this archive 5 files on 16 - MB removable disk (all except reame.txt).
6. Turn off the player through the safe extraction devices.

It's not supporting mpg movies. You need to convert it to .amv then you can show it on the Player.