Can't get pass hanspree logo to re boot tablet

try and hard reset it

This sounds like a problem I had with a smartphone, turned out to be a dying battery. Worth a try if you can change it easily.

You may be able to use a fast-boot cable for the fire tablet, google fast boot cable for Amazon Fire Tablet and see if its uses fit your need.

go to the hanspree website and find the link for manuals.
You can then download the manual for your tablet model.
Hope this helps

Contact TigerDirect.com and they have them. The Manual will not help you much

3 RESET WAYS on ANDROID TABLETS REVIEW

You need to do a factory reset by holding down the power and the volume (-) down button at the same time until u see a black screen with Command prompts.. After this use the volume up and down buttons to stroll up and down and the power button to select.. Go down to data factory reset and press select then select yes.. And your tablet should reset itself.. This May or may not work on the first try.. Please wait at lease 5 minutes for it to boot up because it will take a while to boot after this so don't get all frustrated. If it's still stuck at the go logo just go back to step 1 and repeat.. This is what I did for my tmax 9 tablet when it was stuck at the go logo.. It didn't work the first ten for me but for the 2nd factory wipe it did the trick..

You can access the BIOS usually by pressing "esc", "F1", "F8", or "F12". One of those buttons

should work.

As for the hang up at the logo, it sounds like your hard drive might have crashed. The same thing

happened to me on my Vaio.