How to open Insignia Model:NS-E2111 speaker not working

Make sure that the audio cables are properly connected for the source (component, composite video or VGA/DVI (computer or other device)). Disconnect any cable in the headphone port.

Was the TV ever used with an audio receiver? If so, the TV speakers may have been turned off. Go to the Home Menu. Go to Settings > Display and Audio > Audio Output > TV Speakers and set this to On. (For Quick settings, press and hold Home. Then go to Sound > TV Speakers and set to On.) If you have a universal remote, the remote could be set to give all audio commands to a receiver. Try the remote so the Audio commands go to the TV. (This will depend on the remote. Please add a comment with the remote brand, model and type (often inside the battery compartment) for the full programming information.)

If you are using external speakers with a receiver, you may need to change the audio settings to PCM for a digital audio output. (This is in the same Audio Output section of the standard menu.)

I hope this helps.

Cindy Wells
(I've locked several remotes to the audio system which causes this type of problem when the home theater system needs a wiring repair.)

look at the speaker it self . open speaker box if you have to so you make sure. red positive black negative .

If you need further help, I’m available over the phone at https://www.6ya.com/expert/richard_b59056c0c62ecb00

To replace the speakers, you have to open its back cover. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/Pull up older posts. Disassemble procedure to many popular brand TVs are given with illustrations.

try to look on Realtek audio driver im sure it will help

Do you mean the NS-LBD32X-10A? The manual is available here: http://insigniaproducts.com/products/televisions/NS-LBD32X-10A.html?supportTab=open . The direct link to the manual is http://insigniaproducts.com/cms/documents/NS-LBD32X-10A%20UM%20EN.pdf .

Check if the speakers are muted or if the volume is low. Then go to the Menu and in the Audio submenu go down to Speakers. Make sure that the internal speakers are on.

If the speakers still don't work, they may have failed or the wiring may be damaged. Unfortunately, I do not see any speakers for the TV from my usual vendors.

I hope this helps.

Cindy Wells

If the fuse had blown the sub woofer would be dead. I think you have a very low frequency oscillation problem . Now the frequency is so low ( below 15Hz ) one cannot hear it but if you look at the sub woofer speaker it will be pushing like a piston - to and fro very powerfully.
You will need professional help on this one.

Yes, this model will play audio CDs as well as DVDs. You can download the manual here if you need a copy, which explains all the functions.

Goto device manager select your speaker right click hit on update..!

*Device manager (Run >>>devmgmt.msc)

http://www.insignia-products.com/...R1].pdf


Try this link.

Best Buy replaced them with a lower watage model, mine were the NS-3099 model 40 watage, that Best Buy was out of so they traded mine for the NS-3006 model 14 watage. Believe it or not the 3006 was $10 more and sounded like **** on my system. I further read the specs to realize the difference. I drove back up to Best Buy and replaced with a Logitech system of 50 watage for $20 more. Although these do sound better than the 3006, they are in my opinion not as clear as my $30 Insignia 3099 model. None of this makes sense to me. All I can deduct is that Best Buy wanted folks to buy their system at a cheaper price to get a taste of what they can do, and then screw you into buying something else when they falter. And I had limited choice on the shelf. There you go. Thanks for your reply just the same. Terry