How to erase memory on my computer running 8.1.1

That depends on where it was. If it was on a memory card instead of the camera's internal memory and if you haven't done anything else to the card since erasing the frame, you MIGHT be able to recover it. It's just like any other erased file on any other hard drive.

Do a Google search for "data recovery software" and select a program for your computer and operating system. Take the memory card out of the camera and put it into a card reader attached to your computer. Cross your fingers and run the program.

Usually a full erase and firmware restore is needed to recover from that situation. The exact process depends on your model of tablet. The attached video shows it for a typical Procan tablet.

This process will erase all of the data on the tablet. Hopefully you have a backup.

Usually this means that some program has corrupted the system files. A factory reset (which will erase all of your data and programs) may solve the problem.

theres usually two ways. from the mp3 settings you can delete all music. or if you dont have that option you can use your computer to format it. you plug it in and right click its icon, and click format.

When you install a larger SD card it will be a fresh empty memory card. Your existing 8Gb SD card will still have the the 5 hour gig data on it.
You can insert the 8Gb SD memory card into an USB memory card reader and plug this into the USB port on your computer. The computer will see this SD memory card and adapter as an external storage device. You can then open the audio folder on theis SD memory card and copy this file to your computer.

This is because your internal phone memory is getting full. Try deleting some media (not on your memory card) from your phone. Clear browser history and cache. If it is still running slow try doing a full factory restore (usually involves erasing all your data and contacts so make sure you back them up.)
Please rate me, thanks.

To erase a selected file, first press the [ERASE] button. Next, press the [+] (plus) or [-] (minus) button to select "ERASE," and then press the [ERASE] or [OK] button.
To erase all files in a folder, first select the folder and press the [ERASE] button for three seconds or longer. Next, press the [+] (plus) or [-] (minus) button to select "ALL ERASE." Finally, press the [ERASE] or [OK] button.
NOTE:
The recorder should be formatted using only by using the internal FORMAT function found in the recorder's Menu. Formatting using the computer may corrupt system files needed to run the recorder, so computer formatting is not recommended. Individual files can be deleted using the computer with no negative effects.

1. Press Menu/Set, 8, 4.
2. Press Fax start
3. Press Stop/exit.

This will print all faxes held in memory, per the manufacturer's manual I found online. It worked. No more clogged memory.

1. Enter the permanent factory remote keyless entry (RKE) keypad code.

1. Press the 1/2 button within 5 seconds to activate the programming mode associated with the memory position 1 settings. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.

1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 1 settings. Entering any new personal code automatically erases the old personal code.

1. Press the 3/4 button within 5 seconds to activate the programming mode associated with the memory position 2 settings. Holding the 3/4 button for more than 2 seconds after activation erases the stored personal code.

1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 2 settings. Entering any new personal code automatically erases the old personal code.

1. Press the 5/6, 7/8, 9/0, 7/8 and 9/0 button within 5 seconds to activate the programming mode or allow the system to timeout.

1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.