Question about HP LaserJet 2840 Printer

1 Answer

Magneta Color (Toner) and when I print, the Magneta color does not print. Even on supplies status page, the yellow color section at the bottom is blank where the yellow color should be printed. How c

I installed New Mageneta Toner but, when i print the magneta is not printing .need solution

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 400 Answers

Hello,
The Magenta or RED toner cartridge should be removed and double check that you have indeed removed the pull tab located on the side of the cartridge which will remove the sealing tape off the new toner cartridge.
The YELLOW toner cartridge on the other hand if it is not new then it is perhaps empty and needs to be replaced. Another option is to remove the YELLOW toner cartridge from the machine, Tap it and shake it side to side to loosen the toner that is in it, and replace it back into the machine, this will usually make it start to work again!
Good Luck!
Rich Lilja

Posted on Jul 29, 2016

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Color toners are empty

Press Green Tick, Right, -> System Setup -> Right, Right, -> Print Quality, Right -> Replace Supplies. Change from stop at out, to override at out. It'll let you print, and you'll get loads more out of your toner before the pages start to fade.
Dan :-)

Posted on Oct 06, 2008

komguy
  • 2306 Answers

SOURCE: I replaced both cartriges (Black and Color) and

You can dab the bottom of the color cartridge on a damp paper towel, check the streaks left behind, if there is no yellow either there is no yellow in the cartridge or it's just plugged. Dab it a few times on a wet towel, if still no yellow, you need another cartridge.

Posted on Dec 22, 2009

Testimonial: "Thank you. You were right on! Sadly enough, this is the second consecutive cartridge that was without yellow. Is this a common flaw from HP?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Yelllow color is not printing


check yellow cartridge to see if toner seal tab has been pulled out

Aug 31, 2014 | HP LaserJet 2840 All-In-One Printer

2 Answers

Yellewo does not print


Must replace the nozzle/ cartridge carriage as the nozzle for yellow is most likely clogged

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Aug 31, 2014 | HP LaserJet 2840 All-In-One Printer

1 Answer

When the paper prints, the color is missing in areas. It looks like a streak mark down the page. The black ink is full color, they yellow and cyan have a white, non-printed streak down the center, and...


Inspect the rollers for dirty or damaged surfaces. Clean up any loose toner or other debris in the machine. Note: avoid touching any roller with bare skin; especially in the fuser section or the photosensitive drum in the toner section. Skin oil can cause poor print quality or premature degradation of the roller surface.

Jul 06, 2017 | OKI C3200n Led Printer

1 Answer

I havean HP 2600n, anything red prints in a faded yellow. I've seen other posting regarding this put all answers suggest something wrong with the printer. However, when I had a supplies status page...


change the cartridges. Theres nothing else that can alter the color like that without rewriting the drivers. B4 you do, take each one out, shake gently from side to side to even out any toner, and try again.If they print better, your toner is low.

May 26, 2010 | HP Color LaserJet 2600n Printer

1 Answer

Hi, I just aquired an HP 4600n color laser printer, it is used but it works good for text but when printing pictures it prints a really bad quality mainly due to a buch of (mostly yellow)lines running the...


First. Examine the toner cartridges by inspecting the surface of the drum of each color cartridge. Score marks? Replace toner cartridge(s).
Next. for vertical lines from top to bottom, you will want to inspect the fuser real quick to see if the Hot roller is scored or worn or discolored or any adhesives are adhered to roller. Should be perfectly smooth and uniform in color.
Next, do the consumables life page which is in a menu function.
Information --> Supplies Status Page.
This will tell you the life remaining of the image transfer kit (C9724A) as well as fuser unit. These indicators will help you decide if the consumables are the first cause of the print quality issues you are observing.

Feb 12, 2010 | HP Color LaserJet 4600n Printer

1 Answer

Replaced black toner..now printer won't print any


In this case, actually it is not the Black toner that got depleted. Here the message being displayed indicate that one of the color Toner supply need to be replaced as it got depleted and currently the printer is printing in Black and white using the Black toner cartridge.

in this case, to troubleshoot these issues please try performing the following and check for the results.

* 1. Check for the level of the toner cartridges:

a) Check from the HP Toolbox application. Here are the steps to be performed from your PC:

* Access the Toolbox software.
* Select the Status tab.
* Select the Device status option.

Here you can check for the supplies status in terms of the % remaining for each toner cartridges.

b) By checking the supplies status from the printer control panel display.

On the printer display when printer is in Ready mode the supplies status can be checked from the supplies level indicator. Each toner cartridge and the Imaging drum level will be indicated by a bar which varies according to the level of the supplies present.

c) Print the supplies status page from the printer.

* On the printer control panel menu, press Menu .
* Use the (Right Arrow) button to select Reports, and then press Enter .
* Use the (Right Arrow) button to select Supplies Status, and then press Enter .

If any of the color toner cartridges and the Imaging drum have a low supply level replace them with genuine HP print cartridges.

The part numbers of the consumables are as follows:

* Black print cartridge - Q3960A
* Cyan print cartridge - Q3971A
* Magenta print cartridge - Q3973A
* Yellow print cartridge - Q3972A
* Imaging Drum - Q3964A

Sep 23, 2009 | HP LaserJet 2840 Printer

2 Answers

HP LaserJet 1500... prints color yellow ONLY


It's possible that the toner in the cartridge is not evenly distributed. You can redistribute toner if you gently shake the cartridge from side to side, then reinstall it to see if this affects performance. Please also see this article.
You might wish to use the guided troubleshooting option available from HP support here. Or have a look at the troubleshooting section in the user manual here. Then clean the engine & calibrate the printer, as described pg. 88.
If that's no help, please see this forum post and the linked attachments within.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Sep 01, 2009 | HP LaserJet 1500L Color Printer

1 Answer

Color toners are empty


Press Green Tick, Right, -> System Setup -> Right, Right, -> Print Quality, Right -> Replace Supplies. Change from stop at out, to override at out. It'll let you print, and you'll get loads more out of your toner before the pages start to fade.
Dan :-)

Sep 30, 2008 | HP Color LaserJet 2600n Printer

2 Answers

Out of toner........ but not really.....


Print a Supplies Status page to see the actual pages printed...

To print the Supplies Status page from the printer, on the printer control panel, select
Reports Menu, Supplies Status, and then Print Supplies Status page.

If the page count from the Supplies Status page indicates that the toner should not be in need of replacement then you have a bad cartridge. Actually, the cartridge is probably fine but the chip on the cartridge has got a problem. Return the cartridge to O.D. and get another one. Unfortunately, chips that don't work properly in not all that unusual so HP has a pretty easy return policy.

Hope this helps.

Mar 07, 2008 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
HP LaserJet 2840 Printer Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...