Memery Card
SOURCE: Canon PowerShot SD 630 Digital Elph "Memory Card Error"
Hi,
I'm sorry to tell that PowerShot SD 630 does not support SDHC cards over 2 gig.
If you want the camera to take a card over 2 gig then you are stuck standard SD cards.
The other camera does support the card because it's a higher model.
Regards.
SOURCE: Tried to unlock Lexar SD 2GB and Lexar SDHC 4 GB - No luck
First of all, the 4GB card will never be able to work in your camera. Check on its face. It likely says SDHC, and SDHC cards as this format came out after your camera was designed (I know it looks exactly like a normal SD card, but it's not).
Now the 2GB card should work with your camera as it is a standard SD card. Remove the card from your camera. Look on the side of the card for the tiny slide switch, and slide it to the other "unlocked" position. Reinsert it in the camera, and see if that corrects the problem.
SOURCE: memory card stuck in powershot sx130 iscamera
To get the card out. push it down and you'll hear a click and then it will pop up. Check the slide switch on the card to see if it's locked which "might" be causing the error.
SOURCE: Canon IXUS 970 IS will not recognise 2GB SD card although it used to do so
The memory card might have been damaged.If it was a problem with your camera it might not have recognized your 32k sd card.
So buy a new sd card.
The following digital camera memory cards are
compatible with your BenQ DC E53. Every digital camera memory card we
offer is manufactured to the highest standard and carries a 2 year
minimum warranty.Your BenQ DC E53 accepts SD Card cards.The largest SD Card card you can use in your BenQ DC E53 is 2GB
So you can buy up to 2GB SD cards.
52 views
Usually answered in minutes!
×