Hi moves foeward & reverse approx 6 feet stops dead ?

Tree is approx 6 feet tall payed approx 200.00 dollars for this tree .not happy with this failure .it is the black box approx 3in sq. with a plug in for the lights ...If you wish to get some details; check the site linked here. AmanStino Mouse Pad with Gel Wrist Pad grey9 0 7 8 AmanStino

The code 6 failure code is the toggle throttle [engager] isn't in the neutral position when power is applied to the scooter. If the engager doesn't return to the neutral position as soon as you turn the key on the scooter would start to move, that woul

Engager
1. Check connections on red, white and black wires at crimps and soldered joints. (Flash Code
7)
2. Use meter to check for:
- White & Red: 5k1 + 10%
- Red & Black: 2.5k1 (approx.)
- White & Black: 2.5k1 (approx.)
3. With meter between Red & Black, squeeze engager forward. Resistance should go from 2.5k
down to 01 smoothly.
4. With meter between White & Black, squeeze engager reverse. Resistance should go from
2.5k down to 0 1 smoothly.
5. Check voltages (with key on):
- Forward - Red- 4.5V + .1V
- Neutral - Black- 2.5V + 0.1V
- Reverse - White - .5V +.1V
If using a Test Harness - White & Red: 5k, Forward - Red & Brown: 2-5k, Reverse - White &
Brown: 2-5k.
1. Use Red & Brown squeeze engager slowly forward 25 down to 0 slowly.
2. Use White & Brown squeeze engager slowly reverse 25 down to 0 slowly. Make sure dial
speed is set to10.

Hi Ian,

Time for a new unit. Some component on the board level is malfunctioning.

If you need UPS, Surge, or Power Related help contact:
Daniel with Power & Systems Innovations 800.260.2259 or go to our website: http://psihq.com/
•• If this helped - click YES :) ••

this link may help there is a good section on replacing batteries and doing self test again

click here for manual

Hi. 8 flashes is a fault code for a motor fault. It will be either worn brushes in the motor or faulty connectors to the motor. This fault code means that there is no circuit through the motor. Probably time to overhaul the motor. Most mobility scooters have plugs and sockets that are really to small to carry the amount of current that they do. Because of this, they sometimes fail.Good luck. Neil.

Remove the batteries. Remove the receiver from the PC. Reinsert and try to link them again.

well there code be somting wrong with ur board. i suggest getting a new one.

Wireless keyboards do have some delay, especially when the batteries are low, are you sure the batteries have a charge? Sometimes even new batteries are dead or very weak.

Some wireless keyboards only have a range of a few feet, but, moving it closer kinda defeats the purpose of having one in the first place.

Have you tried to go to (classic view): start>settings>control panel>keyboards... to make adjustments?

try reversing the polarity on one end.
hope it helps.
wg

Hi,
I have trouble in understanding the manual on picture taking. I want to take various pictures for ebay. I will be taking some pictures close-up and others 3-5 feet away. Is there a simple way that everything on one setting. Thanks. Precious78