How do I reinstall windows mobile 5 on my Motorola MC9090G?

Jose-

It is best to contact Motorola Solutions.

portal motorolasolutions com

Mark
Motorola Support

Motorola MC9090
Motorola MC9090 Target Platform This guide is intended for use with a Symbol MC9090 running Microsoft Windows Mobile 5.0. Assumptions

• Technician should be familiar with connecting the terminal via cradle, USB and ActiveSync.
• Technician already has the SyVox Client CAB and a grammar CAB (either the generic one or a site specific one)

Installation Procedure

1. Set up and save your wireless configuration.
2. Establish an ActiveSync1) connection between your PC and your terminal.
3. Copy the SyVox Client and Grammar CAB files to the device in a known directory.
4. From the device, install the SyVox Speech Client and Grammar CAB files by tapping on them from the directory you installed them in.
5. If this is your first time running SyVox on this terminal, SyVox will request a License Key. Go to the Menu ? License screen where you will be given a screen with a field for your License Key and your SyVox Serial Number (your device's unique identifier). Contact Genesta with the SyVox Serial Number displayed to receive a 16-character License Key for the top field. Enter it and tap OK.
6. To perform a simple test of your installation after SyVox finishes loading the speech engine, tap Menu ? Options ? Host Settings.... Choose the File option; then select the demo.xml file provided with installation; and, then the OK selection to accept that demo file. Select the Press to START Listening button near the bottom of the screen to begin the demo. Remember to have your headset nearby as the built in microphone is not sufficent for production environments.
7. Once you are ready to use this device with a remote host, to connect SyVox to a remote host, tap Menu ? Options ? Host Settings.... Select a Connection Method, enter a Connection Address, and tap OK.
   • A Socket host address is entered in the format *.*.*.*:*, (IP or hostname, colon (:), port (optional; defaults to 3001)).
   • A Web host address host is entered in the format http://*:*/ (http://, IP or hostname, colon (:), port (optional; defaults to 80), rest of address).

Notes

Warm Boot

Sometimes Windows Mobile devices require you perform a warm boot. This can be achieved on this device my holding down the red on/off button for approximately 30 seconds. You will know when the warm boot has completed when a white screen is displayed and the unit restarts the operating system.

Cold Boot

Program installations and settings on Microsoft Windows Mobile 5.0 devices will persist even after a cold boot. To achieve the effects of what a cold boot does on other devices, you must perform a clean boot. Because a clean boot requires interaction between a PC and a terminal in the first place, SyVox is currently not designed to reinstall automatically after a clean boot. Therefore, if you perform a clean boot on your terminal, you will have to repeat the procedures listed in this guide. 1) ActiveSync acts as the gateway between your Microsoft Windows-powered PC and Windows CE-powered device and allows you to transfer data between the two. Download it here: http://download.microsoft.com/download/5/4/6/5467c040-a935-4987-aa30-5dcbc36a57db/setup.msi hope that helps

0 + 7 + POWER Should work

SHIFT - blue key - N

The SSID is the name the computer "sees" when looking for a wireless signal. The router will have only one SSID that it transmits. If this question is for an extender, then it can "see" multiple SSIDs, but only connect to one at a time. Same with anyother wireless device (unless you have multiple wireless cards in your device), it will "see" however many are in range, but only connect to one.

Hello Tim,

just go to support.symbol.com , select Product Manuals, click at Mobile Computers and then select MC9090. It will offer you a few Manuals. Not sure, which one you would need...

I had the same problem and stumbled onto the solution - go to the \ directory on your device and delete the Facebook.vol file. Then start up the Facebook application again. That fixed the problem for me.

when you get the OS from symbol you also need to get the application and platform files at least. the platform file is the one that contains the driver for the radio. you will need to download it using tcm or perhaps you may be able to find an os update which contains all the files and you can do from a sd card. Let me know if you can'ti will need to know what find it as i do have various os for this devices.

Originally, Windows Mobile is not compatible with java files (.jar/.jad). But IBM has a software for Windows Mobile users that solves this issue. (An emulator called WebSphere Everyplace Micro Environment)
1) Go to the downloads section for WebSphere Everyplace Micro Environment
2) Depending on your version of Windows Mobile 5, download the installer (ibm-weme-
wm50-arm.xxxxx.exe):
CLDC 1.1/MIDP 2.0 for Windows Mobile 5.0 Smartphone Edition/ARM
CLDC 1.1/MIDP 2.0 for Windows Mobile 5.0/ARM
CLDC 1.1/MIDP 2.0 VGA (Hi-Res) for Windows Mobile 5.0/ARM
3) Extract and then copy the folders [bin, lib and examples] extracted from weme-wm50-arm-midp20_6.1.0.20060727-102926.zip to a folder in the root of your mobile device
4) On the mobile device, run the emulator exe from the Bin folder and give the direct path of the Jar or Jad file (whether local or on a website)
5) After the Midlet is installed, tap on the Midlet to run it
You should be able to run any Java based Application/Game on your Windows mobile device

I had the same problem and I did a cold boot and the wireless icon showed on on the 'desktop' and I was able to use it again.
to do a cold boot, turn off the unit, remove the battery, pull the trigger and hold the power button for 5 seconds or so, and put the battery back in.