Minolta Dialta Di1610
Google it just as you typed it out the manufactures web page will explain better than we can
If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_c7b5aba9012a13b2
SOURCE: Minolta di1610 error message
What error message? Does itsay toner cartragie need replaced.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: I have di1610 wont at all error ligth are flashing
Description
Machine may cycle ON/OFF repeatedly (keeps rebooting), will not power ON (no boot-up), no message on the operation panel, LCD displays extraneous
characters and/or error code C14A3 (C-14A3).
Solution
CAUSE: The PCL board draws too much current, causing PWB-P to fail. There is no problem with GDI versions of the machine; only machines with PCL
boards are affected.
SOLUTION: The PCL board has been modified to limit current draw. If the symptoms described above occur, replace both the PCL and PWB-P boards.
Note : The new-style PCL board can be identified by a yellow sticker. Machines that had the new-style board installed during production have a yellow
sticker near the serial number plate.
may want a service technician to check the PCL boards as above
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: how to fix the C0210 Error on minolta dialta di1610?
The C0210 error code deals with the Primary charge unit... It is part of the drum unit. It may not be installed correctly or it is not in all the way..... Good Luck
Testimonial: "Thank you so much....! now it's working i just check the drum caridge and install properly"
201 views
Usually answered in minutes!
×