Kenmore air conditionpowercord

you have a breaker not internal fuses. some have protection in power cord.

Look at the wiring diagram.

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Chuck, your particular model (which has been discontinued) had two different models with 115 volt (110 is no longer around) and 250 volt.The rating should be on the manufacturer's serial data plate. Also, you may be able to tell by the power cord that was furnished with the unit.

I have included a link to you Owners/Installation Manual, which will provide more information on how to determine what voltage rating your specific unit has.

http://www.managemylife.com/mmh/owner_manuals/23524/KENMORE-Air-Conditioner-Room-%2842%29-LR707330?brand_name_search=58075180700+KENMORE

Hope this helped you. Please let me know. Thanks.

Yes I recomend you check the plug and also the power to the wall outlet.

replace the fan blade then clean the unit to get a very good condition

The pigtail cord has a hot leg and neutral for 115 volts, or if 230 volts , 2 hot legs of 115 volts & and a ground. The Hot leg (if one) is routed through the switch. The switch seds power to the compresor and fan motor. The neutral or other dside of power is the side all loads will terminate to have both sides of power as a AA batt in a flashlight, both ends of the batt must be present, as this is all there is and you willneed to trace wires a diagram is never required.

there should be a diagram on the side of the case that will help clarify

The main power connection is typically behind the panel with the power, speed and thermostat switches.

Their information is absolutely not correct. You can purchase replacement power cords for any product.

If you prefer, I can provide you with the correct replacement cords; I simply need the brand and model number of the AC units

HI , LISTEN MY AIR CONDITIONER DOES NOT START. CORD,THE POWER-TEMP CARD OR WHAT ELSE IT HAPPENED IN A LIGHT OUTIGE. THANKYOU. IT A KENMORE 18,000