Hiya.. could someone please tell me what (E08) fault code is on a Panasonic VRV system? many thanks

https://www.youtube.com/watch?v=-Ugge61yrHE

Has to do with the motor

hi, A3 Indoor Malfunction of drain Level control system.

Air Conditioning Fault Codes

MITSUBHISI CITY UNIT VRV fault code 5301

Hi.

E08 means that the motor has failed (tachiometer error). Shut down your machine and disconnect power cord for five or ten minutes. If that is not enough to clear the code call the support number listed in your owner manual.

Regards.

Ginko

Hi.

Al was correct in stating that a service call is needed. E08 is a motor error. The control boards detects an incorrect input from the tachio-sensor attached to the motor. The motor, mechanics, wiring and control board must be tested.

Regards.

Ginko

u4 faults is a comunication fault check 2 core wiring

Ho fault code what is this

The light blinking twice means there is a fault within the system and it is a code to tell Panasonic where roughly the fault lies.
Go to Panasonic's web site and look for your set then input the fault code and hopefully they will tell you where the fault lies.

hi I had this fault, google said it was tachometer fault. the e08 fault on my hoover optima was not the tachometer, i checked it, but the fix was very easy, the motor brushes were worn out and i changed them for 10 quid, I made a video of it its on youtube http://www.youtube.com/watch?v=xYn-f78GB4U and it shows you how to test the tacho and how to change the brushes, hope this helps someone

hiya
i take it this is a washer dryer, as the fault code f-14 is the dryer heater.

hope this helps



please dont forget to rate the helpfulness of this reply, thanks kj