- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are many different ways, because each TV manufacturer calls each menu option something different. In your TV menu there should be an option that says Set Up, or Channels, or something similar. Your TV should be, Menu, pan right to Channel, select whether you are using Air (air meaning antenna, picking up channels that are broadcast free over the air) or Cable (only if you use cable with no box). Then the option below should be auto scan. Allow to run completely. Sanyo DP42D24 User Manual Channel
for some reason it is not seeing you cable signal. you will need to make sure you have it set up for cable and not air. check your input options, like tv/av/hdmi/ ect
hope this helps
Used the tv remote go into tv Menu goto SETUP go down Ch. enter pick CABLE and enter again.Tv now will go into auto scanning for CABLE channels.After the auto scan done for the CABLE channels are finish.After this u will able to go to channel 60 to used the dish remote.
hi friend,
Press the TV Menu button then with the < or > arrows scroll to the Channel menu. From there you can select the auto scan. or
Search the Code List for your device; try all codes that look like they describe your equipment.
hope this helps u
please rate me....................
thank u for using fixya
regards sivaranjini
Found this in the most frequently asked questions at the Dynex customer support website on page 3. the website is:(http://www.dynexproducts.com/pc-680-23-dynex-32-720p-flat-panel-lcd-hdtv-matte-black.aspx) You can also call the customer support telephone number at 1-800-305-2204. between the hours of 7am-12am CST. Give them the model number of you television and tell them you are having problems completing the autoscan of the television. I hope this information helps you with your problem. 1.How do I set up my channels or run an autochannel search?
2.Are you using a cable/satellite box, cable connected directly to the TV, or an antenna?
3.If you are using a cable or satellite box you must use the remote that came with that box to change channels.
4.Make sure you have the correct input selected to view channels via the cable or satellite box. For example, if the cable or satellite box is connected via component cables please press input and select Component 1 or Component 2 to view your channels.
If you are using cable connected directly to the TV:
1.Press MENU. The on-screen menu opens.
2.Press < or > to select Channel, then press v to access the Channel menu.
3.Press ^ or v to select Air/Cable, then press < or > to select Cable.
4.Press ^ or v to select Auto Scan. Press > or ENTER.
5.Press ^ or v to select Cable System, then press < or > to select your type of cable or satellite system. You can select STD, IRC, HRC, or AUTO. If you are not sure what type of system you have, select AUTO.
1.Press ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes all cable channels you receive.
If you are using an antenna:
1.Press MENU. The on-screen menu opens.
2.Press < or > to select Channel, then press v to access the Channel menu.
3.Press ^ or v to select Air/Cable, then press < or > to select Air.
4.Press ^ or v to select Auto Scan. Press > or ENTER.
5.Press ^ or v to select Start to Scan, then press > or ENTER to start scanning. Your TV memorizes all analog and digital channels you receive.
×