- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I advice you power off the magicolor 2430 DL and power on after few minutes, while the magicolor 2430 DL is loading or booting, pull out the plug from the AC outlet and wait for minutes before plugging it back and power on, if the problem still per, press the stop button for about 5 seconds and release, see what happens, if it fix the problem.
Mic Wiring Stock
1- Shield
2- Audio
3- Transmit
4- Receive Astatic (4
wire)
1- Shield
2- White
3- Red
4- Black
Astatic (6
wire)
1- Shield & Blue
2- White
3- Red
4- Black
Yellow NC Daiwa EM-500
Cobra CA Series
1- Shield & Black
2- Red
3- White
4- Blue Galaxy DC-521S
(4 wire)
1- Shield
2- Yellow
3- Red
4- Black Galaxy CB-660EI
1- Shield & Black
2- White
3- Red
4- Blue Sadelta
1- Shield
2- White
3- Brown
4- Green Turner
1- Shield & Red
2- White
3- Blue
4- Black
Yellow NC
If I am going to have a car and do a lot of audio installations, I try and order the manual for it. The manual usually has a full wiring schematic. You might call down to your local Toyota dealership and see if they can help you with the wiring schematic.
Also, you could just run new speaker wires. I know its a pain, but that is another alternative. With that being a newer car though I can understand not wanting to start tearing off internal moldings.
The ECM tells the fuel pump to come on. You can get a circuit breaker from most parts stores, and many stores you can get a repair manual for $20 that will have a schematic in it.
×