My bracket is broke where can I found this part only in houston tx seems like no one got it unless buying the whole kit is to expensive need help please?

Autozone and advance auto have kits to rent to do this job. Problem is you cant buy a clutch anymore. Junk yard to get a compressor with a good clutch.

SOUNDS very plausible ,have had it happen on bmw a few times ,would recommend buying bracket re-assembling and running vehicle and checking all other pulleys that run on the serpentine belt carefully for wear or noise as it is usually a vibration/loose brackets that cause a mounting bracket to crack or fail ,sorry cant help you on costs or availability ,it often changes with dealerships

Hi Gouldkareng.

Please allow me to try to help you.

There could be a number of reasons why your AC keeps blowing fuses. Some of these could be..
* An issue with your fuse box.
* The filter could be dirty.
* There could be a problem with your central power supply.
* The condenser fan might have gone bad.
* There could be low refrigerant.
* Your circuitry might be causing the problem.
* The capacitor could be malfunctioning.
The list is way too vast. You could find a whole list of problems detailed here...
https://getpureair.com/why-does-my-air-conditioner-keep-blowing-fuses/

As there are way too many problems wiuth fixing this kind of an issue, there are way too many solutions and if you want to try and fix the probelm ob your own, here is some information that could be usewful to you..
https://yourairexperts.com/blog/ac-tripping-breaker
You can also find more help here...
https://asm-air.com/airconditioning/air-conditioner-circuit-breaker-keeps-tripping-asm-tips/

I have also attached a video that you might find helpful in aiding you with this issue.

Though it is very true that fixing this kind of a problem does not involve rocket science, it might turn out to be too much of an ordeal for you. As you are in Houston Tx, at the following places..

https://acmanhouston.com/contact-us/
https://www.abacusplumbing.net/
https://www.besthvacairconditioning.com/
http://24.repair/

If you want to buy used ACs in Houston Tx, do check out the following...
1. A1 & AC Appliance Center Address: 1028 N Shepherd Dr, Houston, TX 77008, USA Phone: +1 713-868-7402
2. https://pmhvac.com/
3. http://www.jmapplianceac.com/

Hope that helps.

Best wishes. Regards.

Hi! I've found a few presser feet at Handcock's and my local quilt shop. Brother dealers will also have pressure feet for your machine. Brother dealers in your area are BOB MCDOUGAL SEWING MACHINE CO.
1301 YALE STREET
HOUSTON , TX 77008
713-864-2601

and
SEW CONTEMPO
18203 EGRET BAY BLVD
HOUSTON , TX 77058
281-333-5322
The folks at Sew Contempo are really nice, but I'm sure the ones at Bob McDougal's place are too. I just have never dealt with them.
Happy Sewing!
Robbie

sounds like your recoil spring is broken...shouldn't be too hard of a job changing it out. you may find that it is cheaper to buy the whole thing on ebay. Some of the rebuild kits are expensive

You can buy a kit with everything you need from any auto parts store. If you mean replace the sway bar its self no you do not, unless its broke or bent.

If it is only a bracket you can try to buy only it or whole heat-sink kit. You can search the Web - I found it at http://www.prontotech.com/product/hewlett-packard-da193a-heatsnk-hp-p_984992439
You can check out www.newegg.com too, they have plenty of this kind of stuff. eBay.com is a good option to find used parts.

You can take your Samsung Phone for Repair to Dr. Cell Phone in Houston, TX. They do all kinds of Samsung Phone Repairs.